/*
 * nghttp2 - HTTP/2 C Library
 *
 * Copyright (c) 2015 Tatsuhiro Tsujikawa
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */
#include "shrpx_connection.h"

#ifdef HAVE_UNISTD_H
#  include <unistd.h>
#endif // HAVE_UNISTD_H
#include <netinet/tcp.h>

#include <limits>

#include <openssl/err.h>

#include "shrpx_tls.h"
#include "shrpx_memcached_request.h"
#include "shrpx_log.h"
#include "memchunk.h"
#include "util.h"
#include "ssl_compat.h"

using namespace nghttp2;

namespace shrpx {

#if !LIBRESSL_3_5_API && !LIBRESSL_2_7_API && !OPENSSL_1_1_API

void *BIO_get_data(BIO *bio) { return bio->ptr; }
void BIO_set_data(BIO *bio, void *ptr) { bio->ptr = ptr; }
void BIO_set_init(BIO *bio, int init) { bio->init = init; }

#endif // !LIBRESSL_3_5_API && !LIBRESSL_2_7_API && !OPENSSL_1_1_API

Connection::Connection(struct ev_loop *loop, int fd, SSL *ssl,
                       MemchunkPool *mcpool, ev_tstamp write_timeout,
                       ev_tstamp read_timeout,
                       const RateLimitConfig &write_limit,
                       const RateLimitConfig &read_limit, IOCb writecb,
                       IOCb readcb, TimerCb timeoutcb, void *data,
                       size_t tls_dyn_rec_warmup_threshold,
                       ev_tstamp tls_dyn_rec_idle_timeout, Proto proto)
    :
#ifdef ENABLE_HTTP3
      conn_ref{nullptr, this},
#endif // ENABLE_HTTP3
      tls{DefaultMemchunks(mcpool), DefaultPeekMemchunks(mcpool),
          DefaultMemchunks(mcpool)},
      wlimit(loop, &wev, write_limit.rate, write_limit.burst),
      rlimit(loop, &rev, read_limit.rate, read_limit.burst, this),
      loop(loop),
      data(data),
      fd(fd),
      tls_dyn_rec_warmup_threshold(tls_dyn_rec_warmup_threshold),
      tls_dyn_rec_idle_timeout(tls_dyn_rec_idle_timeout),
      proto(proto),
      last_read(0.),
      read_timeout(read_timeout) {

  ev_io_init(&wev, writecb, fd, EV_WRITE);
  ev_io_init(&rev, readcb, proto == Proto::HTTP3 ? 0 : fd, EV_READ);

  wev.data = this;
  rev.data = this;

  ev_timer_init(&wt, timeoutcb, 0., write_timeout);
  ev_timer_init(&rt, timeoutcb, 0., read_timeout);

  wt.data = this;
  rt.data = this;

  // set 0. to double field explicitly just in case
  tls.last_write_idle = 0.;

  if (ssl) {
    set_ssl(ssl);
  }
}

Connection::~Connection() { disconnect(); }

void Connection::disconnect() {
  if (tls.ssl) {
    if (proto != Proto::HTTP3) {
      SSL_set_shutdown(tls.ssl,
                       SSL_get_shutdown(tls.ssl) | SSL_RECEIVED_SHUTDOWN);
      ERR_clear_error();

      if (tls.cached_session) {
        SSL_SESSION_free(tls.cached_session);
        tls.cached_session = nullptr;
      }

      if (tls.cached_session_lookup_req) {
        tls.cached_session_lookup_req->canceled = true;
        tls.cached_session_lookup_req = nullptr;
      }

      SSL_shutdown(tls.ssl);
    }

    SSL_free(tls.ssl);
    tls.ssl = nullptr;

    tls.wbuf.reset();
    tls.rbuf.reset();
    tls.last_write_idle = 0.;
    tls.warmup_writelen = 0;
    tls.last_writelen = 0;
    tls.last_readlen = 0;
    tls.handshake_state = TLSHandshakeState::NORMAL;
    tls.initial_handshake_done = false;
    tls.reneg_started = false;
    tls.sct_requested = false;
    tls.early_data_finish = false;
  }

  if (proto != Proto::HTTP3 && fd != -1) {
    shutdown(fd, SHUT_WR);
    close(fd);
    fd = -1;
  }

  // Stop watchers here because they could be activated in
  // SSL_shutdown().
  ev_timer_stop(loop, &rt);
  ev_timer_stop(loop, &wt);

  rlimit.stopw();
  wlimit.stopw();
}

void Connection::prepare_client_handshake() {
  SSL_set_connect_state(tls.ssl);
  // This prevents SSL_read_early_data from being called.
  tls.early_data_finish = true;
}

void Connection::prepare_server_handshake() {
  auto &tlsconf = get_config()->tls;
  if (proto != Proto::HTTP3 && !tlsconf.session_cache.memcached.host.empty()) {
    auto bio = BIO_new(tlsconf.bio_method);
    BIO_set_data(bio, this);
    SSL_set_bio(tls.ssl, bio, bio);
  }

  SSL_set_accept_state(tls.ssl);
  tls.server_handshake = true;
}

// BIO implementation is inspired by openldap implementation:
// http://www.openldap.org/devel/cvsweb.cgi/~checkout~/libraries/libldap/tls_o.c
namespace {
int shrpx_bio_write(BIO *b, const char *buf, int len) {
  if (buf == nullptr || len <= 0) {
    return 0;
  }

  auto conn = static_cast<Connection *>(BIO_get_data(b));
  auto &wbuf = conn->tls.wbuf;

  BIO_clear_retry_flags(b);

  if (conn->tls.initial_handshake_done) {
    // After handshake finished, send |buf| of length |len| to the
    // socket directly.

    // Only when TLS session was prematurely ended before server sent
    // all handshake message, this condition is true.  This could be
    // alert from SSL_shutdown().  Since connection is already down,
    // just return error.
    if (wbuf.rleft()) {
      return -1;
    }
    auto nwrite = conn->write_clear(buf, len);
    if (nwrite < 0) {
      return -1;
    }

    if (nwrite == 0) {
      BIO_set_retry_write(b);
      return -1;
    }

    return nwrite;
  }

  wbuf.append(buf, len);

  return len;
}
} // namespace

namespace {
int shrpx_bio_read(BIO *b, char *buf, int len) {
  if (buf == nullptr || len <= 0) {
    return 0;
  }

  auto conn = static_cast<Connection *>(BIO_get_data(b));
  auto &rbuf = conn->tls.rbuf;

  BIO_clear_retry_flags(b);

  if (conn->tls.initial_handshake_done && rbuf.rleft() == 0) {
    auto nread = conn->read_clear(buf, len);
    if (nread < 0) {
      return -1;
    }
    if (nread == 0) {
      BIO_set_retry_read(b);
      return -1;
    }
    return nread;
  }

  if (rbuf.rleft() == 0) {
    BIO_set_retry_read(b);
    return -1;
  }

  return rbuf.remove(buf, len);
}
} // namespace

namespace {
int shrpx_bio_puts(BIO *b, const char *str) {
  return shrpx_bio_write(b, str, strlen(str));
}
} // namespace

namespace {
int shrpx_bio_gets(BIO *b, char *buf, int len) { return -1; }
} // namespace

namespace {
long shrpx_bio_ctrl(BIO *b, int cmd, long num, void *ptr) {
  switch (cmd) {
  case BIO_CTRL_FLUSH:
    return 1;
  }

  return 0;
}
} // namespace

namespace {
int shrpx_bio_create(BIO *b) {
#if OPENSSL_1_1_API || LIBRESSL_3_5_API
  BIO_set_init(b, 1);
#else  // !OPENSSL_1_1_API && !LIBRESSL_3_5_API
  b->init = 1;
  b->num = 0;
  b->ptr = nullptr;
  b->flags = 0;
#endif // !OPENSSL_1_1_API && !LIBRESSL_3_5_API
  return 1;
}
} // namespace

namespace {
int shrpx_bio_destroy(BIO *b) {
  if (b == nullptr) {
    return 0;
  }

#if !OPENSSL_1_1_API && !LIBRESSL_3_5_API
  b->ptr = nullptr;
  b->init = 0;
  b->flags = 0;
#endif // !OPENSSL_1_1_API && !LIBRESSL_3_5_API

  return 1;
}
} // namespace

#if OPENSSL_1_1_API || LIBRESSL_3_5_API

BIO_METHOD *create_bio_method() {
  auto meth = BIO_meth_new(BIO_TYPE_FD, "nghttpx-bio");
  BIO_meth_set_write(meth, shrpx_bio_write);
  BIO_meth_set_read(meth, shrpx_bio_read);
  BIO_meth_set_puts(meth, shrpx_bio_puts);
  BIO_meth_set_gets(meth, shrpx_bio_gets);
  BIO_meth_set_ctrl(meth, shrpx_bio_ctrl);
  BIO_meth_set_create(meth, shrpx_bio_create);
  BIO_meth_set_destroy(meth, shrpx_bio_destroy);

  return meth;
}

#else // !OPENSSL_1_1_API && !LIBRESSL_3_5_API

BIO_METHOD *create_bio_method() {
  static auto meth = new BIO_METHOD{
      BIO_TYPE_FD,    "nghttpx-bio",    shrpx_bio_write,
      shrpx_bio_read, shrpx_bio_puts,   shrpx_bio_gets,
      shrpx_bio_ctrl, shrpx_bio_create, shrpx_bio_destroy,
  };

  return meth;
}

#endif // !OPENSSL_1_1_API && !LIBRESSL_3_5_API

void Connection::set_ssl(SSL *ssl) {
  tls.ssl = ssl;

  SSL_set_app_data(tls.ssl, this);
}

namespace {
// We should buffer at least full encrypted TLS record here.
// Theoretically, peer can send client hello in several TLS records,
// which could exceed this limit, but it is not portable, and we don't
// have to handle such exotic behaviour.
bool read_buffer_full(DefaultPeekMemchunks &rbuf) {
  return rbuf.rleft_buffered() >= 20_k;
}
} // namespace

int Connection::tls_handshake() {
  wlimit.stopw();
  ev_timer_stop(loop, &wt);

  auto &tlsconf = get_config()->tls;

  if (!tls.server_handshake || tlsconf.session_cache.memcached.host.empty()) {
    return tls_handshake_simple();
  }

  std::array<uint8_t, 16_k> buf;

  if (ev_is_active(&rev)) {
    auto nread = read_clear(buf.data(), buf.size());
    if (nread < 0) {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake read error";
      }
      return -1;
    }
    tls.rbuf.append(buf.data(), nread);
    if (read_buffer_full(tls.rbuf)) {
      rlimit.stopw();
    }
  }

  if (tls.initial_handshake_done) {
    return write_tls_pending_handshake();
  }

  switch (tls.handshake_state) {
  case TLSHandshakeState::WAIT_FOR_SESSION_CACHE:
    return SHRPX_ERR_INPROGRESS;
  case TLSHandshakeState::GOT_SESSION_CACHE: {
    // Use the same trick invented by @kazuho in h2o project.

    // Discard all outgoing data.
    tls.wbuf.reset();
    // Rewind buffered incoming data to replay client hello.
    tls.rbuf.disable_peek(false);

    auto ssl_ctx = SSL_get_SSL_CTX(tls.ssl);
    auto ssl_opts = SSL_get_options(tls.ssl);
    SSL_free(tls.ssl);

    auto ssl = tls::create_ssl(ssl_ctx);
    if (!ssl) {
      return -1;
    }
    if (ssl_opts & SSL_OP_NO_TICKET) {
      SSL_set_options(ssl, SSL_OP_NO_TICKET);
    }

    set_ssl(ssl);

    prepare_server_handshake();

    tls.handshake_state = TLSHandshakeState::NORMAL;
    break;
  }
  case TLSHandshakeState::CANCEL_SESSION_CACHE:
    tls.handshake_state = TLSHandshakeState::NORMAL;
    break;
  default:
    break;
  }

  int rv;

  ERR_clear_error();

#if OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL)
  if (!tls.server_handshake || tls.early_data_finish) {
    rv = SSL_do_handshake(tls.ssl);
  } else {
    for (;;) {
      size_t nread;

      rv = SSL_read_early_data(tls.ssl, buf.data(), buf.size(), &nread);
      if (rv == SSL_READ_EARLY_DATA_ERROR) {
        // If we have early data, and server sends ServerHello, assume
        // that handshake is completed in server side, and start
        // processing request.  If we don't exit handshake code here,
        // server waits for EndOfEarlyData and Finished message from
        // client, which voids the purpose of 0-RTT data.  The left
        // over of handshake is done through write_tls or read_tls.
        if (tlsconf.no_postpone_early_data &&
            (tls.handshake_state == TLSHandshakeState::WRITE_STARTED ||
             tls.wbuf.rleft()) &&
            tls.earlybuf.rleft()) {
          rv = 1;
        }

        break;
      }

      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: read early data " << nread << " bytes";
      }

      tls.earlybuf.append(buf.data(), nread);

      if (rv == SSL_READ_EARLY_DATA_FINISH) {
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "tls: read all early data; total "
                    << tls.earlybuf.rleft() << " bytes";
        }
        tls.early_data_finish = true;
        // The same reason stated above.
        if (tlsconf.no_postpone_early_data &&
            (tls.handshake_state == TLSHandshakeState::WRITE_STARTED ||
             tls.wbuf.rleft()) &&
            tls.earlybuf.rleft()) {
          rv = 1;
        } else {
          ERR_clear_error();
          rv = SSL_do_handshake(tls.ssl);
        }
        break;
      }
    }
  }
#else  // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))
  rv = SSL_do_handshake(tls.ssl);
#endif // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))

  if (rv <= 0) {
    auto err = SSL_get_error(tls.ssl, rv);
    switch (err) {
    case SSL_ERROR_WANT_READ:
      if (read_buffer_full(tls.rbuf)) {
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "tls: handshake message is too large";
        }
        return -1;
      }
      break;
    case SSL_ERROR_WANT_WRITE:
      break;
    case SSL_ERROR_SSL: {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake libssl error: "
                  << ERR_error_string(ERR_get_error(), nullptr);
      }

      struct iovec iov[1];
      auto iovcnt = tls.wbuf.riovec(iov, 1);
      auto nwrite = writev_clear(iov, iovcnt);
      if (nwrite > 0) {
        tls.wbuf.drain(nwrite);
      }

      return SHRPX_ERR_NETWORK;
    }
    default:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake libssl error " << err;
      }
      return SHRPX_ERR_NETWORK;
    }
  }

  if (tls.handshake_state == TLSHandshakeState::WAIT_FOR_SESSION_CACHE) {
    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "tls: handshake is still in progress";
    }
    return SHRPX_ERR_INPROGRESS;
  }

  // Don't send handshake data if handshake was completed in OpenSSL
  // routine.  We have to check HTTP/2 requirement if HTTP/2 was
  // negotiated before sending finished message to the peer.
  if ((rv != 1
#ifdef OPENSSL_IS_BORINGSSL
       || SSL_in_init(tls.ssl)
#endif // OPENSSL_IS_BORINGSSL
           ) &&
      tls.wbuf.rleft()) {
    // First write indicates that resumption stuff has done.
    if (tls.handshake_state != TLSHandshakeState::WRITE_STARTED) {
      tls.handshake_state = TLSHandshakeState::WRITE_STARTED;
      // If peek has already disabled, this is noop.
      tls.rbuf.disable_peek(true);
    }
    std::array<struct iovec, 4> iov;
    auto iovcnt = tls.wbuf.riovec(iov.data(), iov.size());
    auto nwrite = writev_clear(iov.data(), iovcnt);
    if (nwrite < 0) {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake write error";
      }
      return -1;
    }
    tls.wbuf.drain(nwrite);

    if (tls.wbuf.rleft()) {
      wlimit.startw();
      ev_timer_again(loop, &wt);
    }
  }

  if (!read_buffer_full(tls.rbuf)) {
    // We may have stopped reading
    rlimit.startw();
  }

  if (rv != 1) {
    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "tls: handshake is still in progress";
    }
    return SHRPX_ERR_INPROGRESS;
  }

#ifdef OPENSSL_IS_BORINGSSL
  if (!tlsconf.no_postpone_early_data && SSL_in_early_data(tls.ssl) &&
      SSL_in_init(tls.ssl)) {
    auto nread = SSL_read(tls.ssl, buf.data(), buf.size());
    if (nread <= 0) {
      auto err = SSL_get_error(tls.ssl, nread);
      switch (err) {
      case SSL_ERROR_WANT_READ:
      case SSL_ERROR_WANT_WRITE:
        break;
      case SSL_ERROR_ZERO_RETURN:
        return SHRPX_ERR_EOF;
      case SSL_ERROR_SSL:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: "
                    << ERR_error_string(ERR_get_error(), nullptr);
        }
        return SHRPX_ERR_NETWORK;
      default:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: SSL_get_error returned " << err;
        }
        return SHRPX_ERR_NETWORK;
      }
    } else {
      tls.earlybuf.append(buf.data(), nread);
    }

    if (SSL_in_init(tls.ssl)) {
      return SHRPX_ERR_INPROGRESS;
    }
  }
#endif // OPENSSL_IS_BORINGSSL

  // Handshake was done

  rv = check_http2_requirement();
  if (rv != 0) {
    return -1;
  }

  // Just in case
  tls.rbuf.disable_peek(true);

  tls.initial_handshake_done = true;

  return write_tls_pending_handshake();
}

int Connection::tls_handshake_simple() {
  wlimit.stopw();
  ev_timer_stop(loop, &wt);

  if (tls.initial_handshake_done) {
    return write_tls_pending_handshake();
  }

  if (SSL_get_fd(tls.ssl) == -1) {
    SSL_set_fd(tls.ssl, fd);
  }

  int rv;
#if OPENSSL_1_1_1_API || defined(OPENSSL_IS_BORINGSSL)
  auto &tlsconf = get_config()->tls;
  std::array<uint8_t, 16_k> buf;
#endif // OPENSSL_1_1_1_API || defined(OPENSSL_IS_BORINGSSL)

  ERR_clear_error();

#if OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL)
  if (!tls.server_handshake || tls.early_data_finish) {
    rv = SSL_do_handshake(tls.ssl);
  } else {
    for (;;) {
      size_t nread;

      rv = SSL_read_early_data(tls.ssl, buf.data(), buf.size(), &nread);
      if (rv == SSL_READ_EARLY_DATA_ERROR) {
        // If we have early data, and server sends ServerHello, assume
        // that handshake is completed in server side, and start
        // processing request.  If we don't exit handshake code here,
        // server waits for EndOfEarlyData and Finished message from
        // client, which voids the purpose of 0-RTT data.  The left
        // over of handshake is done through write_tls or read_tls.
        if (tlsconf.no_postpone_early_data && tls.earlybuf.rleft()) {
          rv = 1;
        }

        break;
      }

      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: read early data " << nread << " bytes";
      }

      tls.earlybuf.append(buf.data(), nread);

      if (rv == SSL_READ_EARLY_DATA_FINISH) {
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "tls: read all early data; total "
                    << tls.earlybuf.rleft() << " bytes";
        }
        tls.early_data_finish = true;
        // The same reason stated above.
        if (tlsconf.no_postpone_early_data && tls.earlybuf.rleft()) {
          rv = 1;
        } else {
          ERR_clear_error();
          rv = SSL_do_handshake(tls.ssl);
        }
        break;
      }
    }
  }
#else  // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))
  rv = SSL_do_handshake(tls.ssl);
#endif // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))

  if (rv <= 0) {
    auto err = SSL_get_error(tls.ssl, rv);
    switch (err) {
    case SSL_ERROR_WANT_READ:
      if (read_buffer_full(tls.rbuf)) {
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "tls: handshake message is too large";
        }
        return -1;
      }
      break;
    case SSL_ERROR_WANT_WRITE:
      wlimit.startw();
      ev_timer_again(loop, &wt);
      break;
    case SSL_ERROR_SSL: {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake libssl error: "
                  << ERR_error_string(ERR_get_error(), nullptr);
      }
      return SHRPX_ERR_NETWORK;
    }
    default:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake libssl error " << err;
      }
      return SHRPX_ERR_NETWORK;
    }
  }

  if (rv != 1) {
    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "tls: handshake is still in progress";
    }
    return SHRPX_ERR_INPROGRESS;
  }

#ifdef OPENSSL_IS_BORINGSSL
  if (!tlsconf.no_postpone_early_data && SSL_in_early_data(tls.ssl) &&
      SSL_in_init(tls.ssl)) {
    auto nread = SSL_read(tls.ssl, buf.data(), buf.size());
    if (nread <= 0) {
      auto err = SSL_get_error(tls.ssl, nread);
      switch (err) {
      case SSL_ERROR_WANT_READ:
      case SSL_ERROR_WANT_WRITE:
        break;
      case SSL_ERROR_ZERO_RETURN:
        return SHRPX_ERR_EOF;
      case SSL_ERROR_SSL:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: "
                    << ERR_error_string(ERR_get_error(), nullptr);
        }
        return SHRPX_ERR_NETWORK;
      default:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: SSL_get_error returned " << err;
        }
        return SHRPX_ERR_NETWORK;
      }
    } else {
      tls.earlybuf.append(buf.data(), nread);
    }

    if (SSL_in_init(tls.ssl)) {
      return SHRPX_ERR_INPROGRESS;
    }
  }
#endif // OPENSSL_IS_BORINGSSL

  // Handshake was done

  rv = check_http2_requirement();
  if (rv != 0) {
    return -1;
  }

  tls.initial_handshake_done = true;

  return write_tls_pending_handshake();
}

int Connection::write_tls_pending_handshake() {
  // Send handshake data left in the buffer
  while (tls.wbuf.rleft()) {
    std::array<struct iovec, 4> iov;
    auto iovcnt = tls.wbuf.riovec(iov.data(), iov.size());
    auto nwrite = writev_clear(iov.data(), iovcnt);
    if (nwrite < 0) {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: handshake write error";
      }
      return -1;
    }
    if (nwrite == 0) {
      wlimit.startw();
      ev_timer_again(loop, &wt);

      return SHRPX_ERR_INPROGRESS;
    }
    tls.wbuf.drain(nwrite);
  }

#ifdef OPENSSL_IS_BORINGSSL
  if (!SSL_in_init(tls.ssl)) {
    // This will send a session ticket.
    auto nwrite = SSL_write(tls.ssl, "", 0);
    if (nwrite < 0) {
      auto err = SSL_get_error(tls.ssl, nwrite);
      switch (err) {
      case SSL_ERROR_WANT_READ:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "Close connection due to TLS renegotiation";
        }
        return SHRPX_ERR_NETWORK;
      case SSL_ERROR_WANT_WRITE:
        break;
      case SSL_ERROR_SSL:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_write: "
                    << ERR_error_string(ERR_get_error(), nullptr);
        }
        return SHRPX_ERR_NETWORK;
      default:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_write: SSL_get_error returned " << err;
        }
        return SHRPX_ERR_NETWORK;
      }
    }
  }
#endif // OPENSSL_IS_BORINGSSL

  // We have to start read watcher, since later stage of code expects
  // this.
  rlimit.startw();

  // We may have whole request in tls.rbuf.  This means that we don't
  // get notified further read event.  This is especially true for
  // HTTP/1.1.
  handle_tls_pending_read();

  if (LOG_ENABLED(INFO)) {
    LOG(INFO) << "SSL/TLS handshake completed";
    nghttp2::tls::TLSSessionInfo tls_info{};
    if (nghttp2::tls::get_tls_session_info(&tls_info, tls.ssl)) {
      LOG(INFO) << "cipher=" << tls_info.cipher
                << " protocol=" << tls_info.protocol
                << " resumption=" << (tls_info.session_reused ? "yes" : "no")
                << " session_id="
                << util::format_hex(tls_info.session_id,
                                    tls_info.session_id_length);
    }
  }

  return 0;
}

int Connection::check_http2_requirement() {
  const unsigned char *next_proto = nullptr;
  unsigned int next_proto_len;

#ifndef OPENSSL_NO_NEXTPROTONEG
  SSL_get0_next_proto_negotiated(tls.ssl, &next_proto, &next_proto_len);
#endif // !OPENSSL_NO_NEXTPROTONEG
#if OPENSSL_VERSION_NUMBER >= 0x10002000L
  if (next_proto == nullptr) {
    SSL_get0_alpn_selected(tls.ssl, &next_proto, &next_proto_len);
  }
#endif // OPENSSL_VERSION_NUMBER >= 0x10002000L
  if (next_proto == nullptr ||
      !util::check_h2_is_selected(StringRef{next_proto, next_proto_len})) {
    return 0;
  }
  if (!nghttp2::tls::check_http2_tls_version(tls.ssl)) {
    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "TLSv1.2 was not negotiated.  HTTP/2 must not be used.";
    }
    return -1;
  }

  auto check_block_list = false;
  if (tls.server_handshake) {
    check_block_list = !get_config()->tls.no_http2_cipher_block_list;
  } else {
    check_block_list = !get_config()->tls.client.no_http2_cipher_block_list;
  }

  if (check_block_list &&
      nghttp2::tls::check_http2_cipher_block_list(tls.ssl)) {
    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "The negotiated cipher suite is in HTTP/2 cipher suite "
                   "block list.  HTTP/2 must not be used.";
    }
    return -1;
  }

  return 0;
}

namespace {
constexpr size_t SHRPX_SMALL_WRITE_LIMIT = 1300;
} // namespace

size_t Connection::get_tls_write_limit() {

  if (tls_dyn_rec_warmup_threshold == 0) {
    return std::numeric_limits<ssize_t>::max();
  }

  auto t = ev_now(loop);

  if (tls.last_write_idle >= 0. &&
      t - tls.last_write_idle > tls_dyn_rec_idle_timeout) {
    // Time out, use small record size
    tls.warmup_writelen = 0;
    return SHRPX_SMALL_WRITE_LIMIT;
  }

  if (tls.warmup_writelen >= tls_dyn_rec_warmup_threshold) {
    return std::numeric_limits<ssize_t>::max();
  }

  return SHRPX_SMALL_WRITE_LIMIT;
}

void Connection::update_tls_warmup_writelen(size_t n) {
  if (tls.warmup_writelen < tls_dyn_rec_warmup_threshold) {
    tls.warmup_writelen += n;
  }
}

void Connection::start_tls_write_idle() {
  if (tls.last_write_idle < 0.) {
    tls.last_write_idle = ev_now(loop);
  }
}

ssize_t Connection::write_tls(const void *data, size_t len) {
  // SSL_write requires the same arguments (buf pointer and its
  // length) on SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE.
  // get_write_limit() may return smaller length than previously
  // passed to SSL_write, which violates OpenSSL assumption.  To avoid
  // this, we keep last length passed to SSL_write to
  // tls.last_writelen if SSL_write indicated I/O blocking.
  if (tls.last_writelen == 0) {
    len = std::min(len, wlimit.avail());
    len = std::min(len, get_tls_write_limit());
    if (len == 0) {
      return 0;
    }
  } else {
    len = tls.last_writelen;
    tls.last_writelen = 0;
  }

  tls.last_write_idle = -1.;

  ERR_clear_error();

#if OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL)
  int rv;
  if (SSL_is_init_finished(tls.ssl)) {
    rv = SSL_write(tls.ssl, data, len);
  } else {
    size_t nwrite;
    rv = SSL_write_early_data(tls.ssl, data, len, &nwrite);
    // Use the same semantics with SSL_write.
    if (rv == 1) {
      rv = nwrite;
    }
  }
#else  // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))
  auto rv = SSL_write(tls.ssl, data, len);
#endif // !(OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL))

  if (rv <= 0) {
    auto err = SSL_get_error(tls.ssl, rv);
    switch (err) {
    case SSL_ERROR_WANT_READ:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "Close connection due to TLS renegotiation";
      }
      return SHRPX_ERR_NETWORK;
    case SSL_ERROR_WANT_WRITE:
      tls.last_writelen = len;
      // starting write watcher and timer is done in write_clear via
      // bio.
      return 0;
    case SSL_ERROR_SSL:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "SSL_write: "
                  << ERR_error_string(ERR_get_error(), nullptr);
      }
      return SHRPX_ERR_NETWORK;
    default:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "SSL_write: SSL_get_error returned " << err;
      }
      return SHRPX_ERR_NETWORK;
    }
  }

  update_tls_warmup_writelen(rv);

  return rv;
}

ssize_t Connection::read_tls(void *data, size_t len) {
  ERR_clear_error();

#if OPENSSL_1_1_1_API
  if (tls.earlybuf.rleft()) {
    return tls.earlybuf.remove(data, len);
  }
#endif // OPENSSL_1_1_1_API

  // SSL_read requires the same arguments (buf pointer and its
  // length) on SSL_ERROR_WANT_READ or SSL_ERROR_WANT_WRITE.
  // rlimit_.avail() or rlimit_.avail() may return different length
  // than the length previously passed to SSL_read, which violates
  // OpenSSL assumption.  To avoid this, we keep last length passed
  // to SSL_read to tls_last_readlen_ if SSL_read indicated I/O
  // blocking.
  if (tls.last_readlen == 0) {
    len = std::min(len, rlimit.avail());
    if (len == 0) {
      return 0;
    }
  } else {
    len = tls.last_readlen;
    tls.last_readlen = 0;
  }

#if OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL)
  if (!tls.early_data_finish) {
    // TLSv1.3 handshake is still going on.
    size_t nread;
    auto rv = SSL_read_early_data(tls.ssl, data, len, &nread);
    if (rv == SSL_READ_EARLY_DATA_ERROR) {
      auto err = SSL_get_error(tls.ssl, rv);
      switch (err) {
      case SSL_ERROR_WANT_READ:
        tls.last_readlen = len;
        return 0;
      case SSL_ERROR_SSL:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: "
                    << ERR_error_string(ERR_get_error(), nullptr);
        }
        return SHRPX_ERR_NETWORK;
      default:
        if (LOG_ENABLED(INFO)) {
          LOG(INFO) << "SSL_read: SSL_get_error returned " << err;
        }
        return SHRPX_ERR_NETWORK;
      }
    }

    if (LOG_ENABLED(INFO)) {
      LOG(INFO) << "tls: read early data " << nread << " bytes";
    }

    if (rv == SSL_READ_EARLY_DATA_FINISH) {
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "tls: read all early data";
      }
      tls.early_data_finish = true;
      // We may have stopped write watcher in write_tls.
      wlimit.startw();
    }
    return nread;
  }
#endif // OPENSSL_1_1_1_API && !defined(OPENSSL_IS_BORINGSSL)

  auto rv = SSL_read(tls.ssl, data, len);

  if (rv <= 0) {
    auto err = SSL_get_error(tls.ssl, rv);
    switch (err) {
    case SSL_ERROR_WANT_READ:
      tls.last_readlen = len;
      return 0;
    case SSL_ERROR_WANT_WRITE:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "Close connection due to TLS renegotiation";
      }
      return SHRPX_ERR_NETWORK;
    case SSL_ERROR_ZERO_RETURN:
      return SHRPX_ERR_EOF;
    case SSL_ERROR_SSL:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "SSL_read: " << ERR_error_string(ERR_get_error(), nullptr);
      }
      return SHRPX_ERR_NETWORK;
    default:
      if (LOG_ENABLED(INFO)) {
        LOG(INFO) << "SSL_read: SSL_get_error returned " << err;
      }
      return SHRPX_ERR_NETWORK;
    }
  }

  return rv;
}

ssize_t Connection::write_clear(const void *data, size_t len) {
  len = std::min(len, wlimit.avail());
  if (len == 0) {
    return 0;
  }

  ssize_t nwrite;
  while ((nwrite = write(fd, data, len)) == -1 && errno == EINTR)
    ;
  if (nwrite == -1) {
    if (errno == EAGAIN || errno == EWOULDBLOCK) {
      wlimit.startw();
      ev_timer_again(loop, &wt);
      return 0;
    }
    return SHRPX_ERR_NETWORK;
  }

  wlimit.drain(nwrite);

  if (ev_is_active(&wt)) {
    ev_timer_again(loop, &wt);
  }

  return nwrite;
}

ssize_t Connection::writev_clear(struct iovec *iov, int iovcnt) {
  iovcnt = limit_iovec(iov, iovcnt, wlimit.avail());
  if (iovcnt == 0) {
    return 0;
  }

  ssize_t nwrite;
  while ((nwrite = writev(fd, iov, iovcnt)) == -1 && errno == EINTR)
    ;
  if (nwrite == -1) {
    if (errno == EAGAIN || errno == EWOULDBLOCK) {
      wlimit.startw();
      ev_timer_again(loop, &wt);
      return 0;
    }
    return SHRPX_ERR_NETWORK;
  }

  wlimit.drain(nwrite);

  if (ev_is_active(&wt)) {
    ev_timer_again(loop, &wt);
  }

  return nwrite;
}

ssize_t Connection::read_clear(void *data, size_t len) {
  len = std::min(len, rlimit.avail());
  if (len == 0) {
    return 0;
  }

  ssize_t nread;
  while ((nread = read(fd, data, len)) == -1 && errno == EINTR)
    ;
  if (nread == -1) {
    if (errno == EAGAIN || errno == EWOULDBLOCK) {
      return 0;
    }
    return SHRPX_ERR_NETWORK;
  }

  if (nread == 0) {
    return SHRPX_ERR_EOF;
  }

  rlimit.drain(nread);

  return nread;
}

ssize_t Connection::read_nolim_clear(void *data, size_t len) {
  ssize_t nread;
  while ((nread = read(fd, data, len)) == -1 && errno == EINTR)
    ;
  if (nread == -1) {
    if (errno == EAGAIN || errno == EWOULDBLOCK) {
      return 0;
    }
    return SHRPX_ERR_NETWORK;
  }

  if (nread == 0) {
    return SHRPX_ERR_EOF;
  }

  return nread;
}

ssize_t Connection::peek_clear(void *data, size_t len) {
  ssize_t nread;
  while ((nread = recv(fd, data, len, MSG_PEEK)) == -1 && errno == EINTR)
    ;
  if (nread == -1) {
    if (errno == EAGAIN || errno == EWOULDBLOCK) {
      return 0;
    }
    return SHRPX_ERR_NETWORK;
  }

  if (nread == 0) {
    return SHRPX_ERR_EOF;
  }

  return nread;
}

void Connection::handle_tls_pending_read() {
  if (!ev_is_active(&rev)) {
    return;
  }
  rlimit.handle_tls_pending_read();
}

int Connection::get_tcp_hint(TCPHint *hint) const {
#if defined(TCP_INFO) && defined(TCP_NOTSENT_LOWAT)
  struct tcp_info tcp_info;
  socklen_t tcp_info_len = sizeof(tcp_info);
  int rv;

  rv = getsockopt(fd, IPPROTO_TCP, TCP_INFO, &tcp_info, &tcp_info_len);

  if (rv != 0) {
    return -1;
  }

  auto avail_packets = tcp_info.tcpi_snd_cwnd > tcp_info.tcpi_unacked
                           ? tcp_info.tcpi_snd_cwnd - tcp_info.tcpi_unacked
                           : 0;

  // http://www.slideshare.net/kazuho/programming-tcp-for-responsiveness

  // TODO 29 (5 (header) + 8 (explicit nonce) + 16 (tag)) is TLS
  // overhead for AES-GCM.  For CHACHA20_POLY1305, it is 21 since it
  // does not need 8 bytes explicit nonce.
  //
  // For TLSv1.3, AES-GCM and CHACHA20_POLY1305 overhead are now 22
  // bytes (5 (header) + 1 (ContentType) + 16 (tag)).
  size_t tls_overhead;
#  ifdef TLS1_3_VERSION
  if (SSL_version(tls.ssl) == TLS1_3_VERSION) {
    tls_overhead = 22;
  } else
#  endif // TLS1_3_VERSION
  {
    tls_overhead = 29;
  }

  auto writable_size =
      (avail_packets + 2) * (tcp_info.tcpi_snd_mss - tls_overhead);
  if (writable_size > 16_k) {
    writable_size = writable_size & ~(16_k - 1);
  } else {
    if (writable_size < 536) {
      LOG(INFO) << "writable_size is too small: " << writable_size;
    }
    // TODO is this required?
    writable_size = std::max(writable_size, static_cast<size_t>(536 * 2));
  }

  // if (LOG_ENABLED(INFO)) {
  //   LOG(INFO) << "snd_cwnd=" << tcp_info.tcpi_snd_cwnd
  //             << ", unacked=" << tcp_info.tcpi_unacked
  //             << ", snd_mss=" << tcp_info.tcpi_snd_mss
  //             << ", rtt=" << tcp_info.tcpi_rtt << "us"
  //             << ", rcv_space=" << tcp_info.tcpi_rcv_space
  //             << ", writable=" << writable_size;
  // }

  hint->write_buffer_size = writable_size;
  // TODO tcpi_rcv_space is considered as rwin, is that correct?
  hint->rwin = tcp_info.tcpi_rcv_space;

  return 0;
#else  // !defined(TCP_INFO) || !defined(TCP_NOTSENT_LOWAT)
  return -1;
#endif // !defined(TCP_INFO) || !defined(TCP_NOTSENT_LOWAT)
}

void Connection::again_rt(ev_tstamp t) {
  read_timeout = t;
  rt.repeat = t;
  ev_timer_again(loop, &rt);
  last_read = ev_now(loop);
}

void Connection::again_rt() {
  rt.repeat = read_timeout;
  ev_timer_again(loop, &rt);
  last_read = ev_now(loop);
}

bool Connection::expired_rt() {
  auto delta = read_timeout - (ev_now(loop) - last_read);
  if (delta < 1e-9) {
    return true;
  }
  rt.repeat = delta;
  ev_timer_again(loop, &rt);
  return false;
}

} // namespace shrpx
