Sat Dec 02 12:00:00 2017 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.64 (42:3:2) has been released.

        * src/simplex/spydual.c
        The internal routine play_coef of the dual simplex solver was
        changed to perform more aggressive perturbation to prevent dual
        degeneracy and avoid stalling even if the current dual basic
        solution is strongly feasible (mainly if the objective is zero,
        so all reduced costs are always zero). Thanks to David Monniaux
        <David.Monniaux@univ-grenoble-alpes.fr> for bug report.

        * src/draft/glpssx.h, glpssx02.c, glpapi07.c
        The exact simplex solver routines were changed to perform
        terminal output according to the verbosity level (specified by
        the control parameter smcp.msg_lev). Thanks to Jeroen Demeyer
        <jdemeyer@cage.ugent.be> for bug report.

        * src/simplex/spxchuzr.c
        The directive #include <config.h> was added. Thanks to Heinrich
        Schuchardt <xypron.glpk@gmx.de> for bug report.

        * examples/graceful.mod
        An example model in MathProg was added. Thanks to Mike Appleby
        <mike@app.leby.org> for contribution.

        * examples/powpl25h.mod powplant.mod wolfra6d.lp wolfra6d.mod
        Three example models in MathProg and one in Cplex LP format
        were added. Thanks to Peter Naszvadi <vuk@cs.elte.hu> for
        contribution.

Tue Jul 25 12:00:00 2017 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.63 (42:2:2) has been released.

        * src/simplex/spxchuzr.h, src/simplex/spxchuzr.c
        An experimental feature (phase I long-step ratio test) was
        included in the primal simplex solver.

        * src/simplex/spxprim.c, src/simplex/spydual.c
        An internal scaling of the objective coefficients was added to
        the primal and dual simplex solvers.

        * src/simplex/spxprim.c
        A minor bug was fixed (correction of flags of fixed non-basic
        variables after removing the perturbation).

        * src/glpk.h, src/glpapi06.c
        New smcp parameters were added (not documented yet):
        int excl (default: GLP_ON)
        Internal simplex solver option:
        GLP_ON  - exclude fixed non-basic variables from the working LP;
        GLP_OFF - keep original variables in the working LP.
        int shift (default: GLP_ON)
        Internal simplex solver option:
        GLP_ON  - shift bounds of variables in the working LP tow. zero;
        GLP_OFF - keep original bounds of variables in the working LP.
        int aorn (default: GLP_USE_NT)
        Internal simplex solver option:
        GLP_USE_AT - use A matrix in sparse row-wise format;
        GLP_USE_NT - use N matrix in sparse row-wise format.
        Parameter out_frq was changed to specify the output frequency
        in milliseconds rather than in simplex iterations.

        src/env/time.c
        The Posix version of glp_time was replaced by new one, which
        doesn't use gmtime functions to improve portability. Thanks to
        Rob Schroeder <Rob.Schroeder@graphicpkg.com> for bug report.

        src/spv.c, src/spv.h
        These files were moved to src/cglib/, since they are used only
        in the MIR cuts generator.

        examples/life_goe.mod, examples/tiling.mod, examples/toto.mod
        Three new example models in MathProg were added. Thanks to
        Peter Naszvadi <vuk@cs.elte.hu> for contribution.

Wed Jun 14 12:00:00 2017 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.62 (42:1:2) has been released.

        * src/simplex/spxprim.c
        An experimental feature (bound perturbation) to improve
        numerical stabilty and avoid cycling was included in the primal
        simplex solver. Currently it is enabled by default.

        * src/simplex/spxprim.c
        Some dense vectors were replaced by sparse ones in full-vector
        storage (FVS) format.

        * src/simplex/spxprim.c, src/simplex/spydual.c
        Assertions trow[q] != 0.0 and tcol[p] != 0.0 were replaced by
        setting an error code to prevent abnormal termination. Thanks
        to Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/simplex/spydual.c
        Removing perturbation was added if the perturbed problem is
        dual infeasible while the original one is dual feasible. Thanks
        to Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/api/mps.c
        A range bug was fixed.
        Thanks to Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/minisat/minisat.c
        Changes were made to provide 64-bit portability. Thanks to
        Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/api/minisat1.c
        Changes related to the minisat solver were made. Thanks to
        Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/api/intfeas1.c
        Changes were made to skip objective integrality check when
        no objective bound is specified. Thanks to Chris Matrakidis
        <cmatraki@gmail.com> for patch.

        * src/glphbm.c, src/glprgr.c, src/env/stream.c, src/env/time.c,
        * src/mpl/mpl5.c, src/mpl/mpl6.c, src/mpl/mplsql.c
        Calls to non-thread-safe functions gmtime, strerror, and strtok
        were replaced by calls to corresponding thread-safe equivalents
        (gmtime_r, strerror_r, and strtok_r for GNU/Linux).

        * w32/*.def, w64/*.def
        glp_config symbol was added. Thanks to Heinrich Schuchardt
        <xypron.glpk@gmx.de> for bug report.

        * examples/pbn/pbn.mod
        A bug was fixed (model didn't work for odd number of rows or
        columns). Thanks to Chris Matrakidis <cmatraki@gmail.com> for
        bug report and patch provided.

Sun Jan 22 12:00:00 2017 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.61 (42:0:2) has been released.

        The following modules were renamed to simplify maintenance.
        * src/prob.h     RENAMED            -> src/api/prob.h
        * src/glpapi01.c RENAMED            -> src/api/prob1.c
        * src/glpapi02.c RENAMED            -> src/api/prob2.c
        * src/glpapi03.c RENAMED            -> src/api/prob3.c
        * src/glpapi04.c RENAMED            -> src/api/prob4.c
        * src/glpapi05.c RENAMED            -> src/api/prob5.c

        * src/env/tls.c
        TLS (thread local storage class specifier) option was added;
        see comments in tls.c for details.

        * configure.ac, config.h.in
        Test for TLS was added.
        Thanks to David Monniaux <david.monniaux@imag.fr> for
        suggestion and Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/env/tls.c
        Dll support was added.
        Thanks to Heinrich Schuchardt <xypron.glpk@gmx.de> for
        contribution.

        The following modules were changed to add __cdecl specifier
        for functions passed to qsort (this is needed only on compiling
        GLPK with MSVC to run under MS Windows).
        * src/api/cpxbas.c
        * src/cglib/cfg1.c
        * src/cglib/gmigen.c
        * src/cglib/mirgen.c
        * src/misc/wclique1.c
        * src/simplex/spychuzc.c
        * src/glpios10.c
        * src/glpios11.c
        * examples/glpsol.c

        * src/glpk.h, src/env/env.c
        The API routine glp_version was changed to avoid initialization
        of the GLPK environment. The new API routine glp_config was
        added (but not documented yet). Thanks to Heinrich Schuchardt
        <xypron.glpk@gmx.de> for suggestion.

        * INSTALL
        Description of the configure option '--with-zlib' was removed.
        Thanks to Balaco Baco <balacobaco@imap.cc> for bug report.

Fri Apr 01 12:00:00 2016 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.60 (41:0:1) has been released.

        * src/glpk.h
        Declarations of all non-documented API routines were hidden by
        #ifdef GLP_UNDOC / #endif.

        src/simplex/spydual.c
        An experimental feature (objective coefficient perturbation)
        to improve numerical stabilty and avoid cycling was included in
        the dual simplex solver.

        This release also includes all the changes made in 4.59.2 and
        4.59.1 non-official test releases (see below).

Fri Mar 18 12:00:00 2016 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.59.2 (40:1:0) has been released.

        NOTE: THIS IS A NON-OFFICIAL TEST RELEASE.

        src/simplex/spxprim.c
        Improvements were made in the internal routine choose_pivot to
        prevent choosing a too small pivot in the primal simplex.

        src/simplex/spydual.c
        Improvements were made in the internal routine choose_pivot to
        prevent choosing a too small pivot in the dual simplex.

        src/simplex/spychuzc.c
        The internal routine spy_eval_bp was added to determine break-
        points of the dual objective function.

        src/simplex/spydual.c
        An experimental feature (long-step ratio test) was included in
        the dual simplex.

        src/glpk.h, src/glpapi06.c
        The GLP_RT_FLIP option (long-step ratio test) was added to
        the simplex solver. Currently it affects only the dual simplex.
        For the primal simplex it is equivalent to GLP_RT_HAR.

        src/examples/glpsol.c
        The '--flip' command-line option was added to glpsol (long-step
        dual ratio test).

        src/proxy/proxy1.c
        Additional check was added to reject wrong solutions somwtimes
        reported by the PROXY heuristic.

        src/glpios10.c
        A bug (memory leak) was fixed in the FPUMP heuristic routine.
        Thanks to <nicolas.derhy@engie.com> for bug report.

Tue Mar 15 12:00:00 2016 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.59.1 (40:1:0) has been released.

        NOTE: THIS IS A NON-OFFICIAL BUG-FIX RELEASE.

        * src/simplex/mpl6.c, src/simplex/sql.c, src/simplex/sql.h
        The header sql.h was renamed to avoid conflicts with standard
        ODBC headers. Thanks to Noli Sicad <nsicad@gmail.com> for bug
        report.

        * src/simplex/spychuzc.c, src/simplex/spychuzc.h
        Minor changes were made.

Fri Mar 11 12:00:00 2016 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.59 (40:0:0) has been released.

        * src/sgf.c, src/sgf.h
        The routines sgf_reduce_nuc and sgf_factorize were changed to
        correctly report structural singularity.

        * src/glpios01.c
        The routine ios_solve_node was changed to retry solving node
        problem in case of the simplex solver failure. Thanks to Chris
        Matrakidis <cmatraki@gmail.com> for patch.

        * src/glpios03.c
        The routine ios_driver was changed to correctly process the
        root node. Thanks to Chris Matrakidis <cmatraki@gmail.com> for
        patch.

        * src/glpios06.c
        Some improvements were made in the MIR cut generation routines.
        Thanks to Chris Matrakidis <cmatraki@gmail.com> for patch.

        The following source modules were splitted/renamed to simplify
        maintenance.
        * src/glpios04.c RENAMED            -> src/spv.c
        * src/glpios05.c glp_gmi_cut  (new) -> src/cglib/gmicut.c
        * src/glpios05.c glp_gmi_gen  (new) -> src/cglib/gmigen.c
        * src/glpios05.c REMOVED
        * src/glpios06.c glp_mir_init (new) -> src/cglib/mirgen.c
        * src/glpios06.c glp_mir_gen  (new) -> src/cglib/mirgen.c
        * src/glpios06.c glp_mir_free (new) -> src/cglib/mirgen.c
        * src/glpios06.c REMOVED
        * src/glpios08.c glp_cfg_init (new) -> src/cglib/cfg2.c
        * src/glpios08.c glp_cfg_free (new) -> src/cglib/cfg2.c
        * src/glpios08.c glp_clq_cut  (new) -> src/cglib/clqcut.c
        * src/glpios08.c REMOVED
        * src/glpmpl.h   RENAMED             -> src/mpl/mpl.h
        * src/glpmpl01.c RENAMED             -> src/mpl/mpl1.c
        * src/glpmpl02.c RENAMED             -> src/mpl/mpl2.c
        * src/glpmpl03.c RENAMED             -> src/mpl/mpl3.c
        * src/glpmpl04.c RENAMED             -> src/mpl/mpl4.c
        * src/glpmpl05.c RENAMED             -> src/mpl/mpl5.c
        * src/glpmpl06.c RENAMED             -> src/mpl/mpl6.c
        * src/glpsql.h   RENAMED             -> src/mpl/sql.h
        * src/glpsql.c   RENAMED             -> src/mpl/sql.c

        * src/proxy/proxy.c
        Minor bug was fixed in the PROXY heuristic routine. Thanks to
        Chris Matrakidis <cmatraki@gmail.com> for bug report.

        * src/cglib/gmicut.c, src/glpk.h
        New API routine glp_gmi_cut was added (not documented yet).

        * src/cglib/gmigen.c, src/glpk.h
        New API routine glp_gmi_gen was added (not documented yet).

        * src/cglib/mirgen.c, src/glpk.h
        New API routines glp_mir_init, glp_mir_gen, and glp_mir_free
        were added (not documented yet).

        * src/cglib/cfg2.c, src/glpk.h
        New API routines glp_cfg_init and glp_cfg_free were added (not
        documented yet).

        * src/cglib/clqcut.c, src/glpk.h
        New API routine glp_clq_cut was added (not documented yet).

        * src/api/rdcc.c, src/api/wrcc.c
        API routines glp_read_graph and glp_write_graph were changed
        due to changes in the data format. For details see the document
        "GLPK: Graph and Network Routines".

        * src/api/rdgr.c, src/api/wrgr.c, src/glpsdf.c, src/glpsdf.h
        Old versions of API routines glp_read_graph and glp_write_graph
        were removed.

        * doc/gmpl_pt-BR.tex, doc/gmpl_pt-BR.pdf
        Translation of the document "Modeling Language GNU MathProg"
        to Brazilian Portuguese (pt-BR) was included (in LaTeX and pdf
        formats). Thanks to Joao Flavio de Freitas Almeida
        <joao.flavio@dep.ufmg.br> for contribution.

Thu Feb 18 12:00:00 2016 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.58 (39:0:0) has been released.

        * src/misc/dimacs.c, src/misc/dimacs.h
        Routines to read data files in DIMACS format were implemented
        as a separate module.

        The following source modules were splitted/renamed to simplify
        maintenance.
        * src/glpapi11.c glp_print_sol       -> src/api/prsol.c
        * src/glpapi11.c glp_read_sol        -> src/api/rdsol.c
        * src/glpapi11.c glp_write_sol       -> src/api/wrsol.c
        * src/glpapi11.c glp_print_ipt       -> src/api/pript.c
        * src/glpapi11.c glp_read_ipt        -> src/api/rdipt.c
        * src/glpapi11.c glp_write_ipt       -> src/api/wript.c
        * src/glpapi11.c glp_print_mip       -> src/api/prmip.c
        * src/glpapi11.c glp_read_mip        -> src/api/rdmip.c
        * src/glpapi11.c glp_write_mip       -> src/api/wrmip.c
        * src/glpapi11.c glp_print_ranges    -> src/api/prrngs.c
        * src/glpapi11.c REMOVED
        * src/glpapi14.c RENAMED             -> src/api/mpl.c
        * src/glpapi15.c glp_read_graph      -> src/api/rdgr.c
        * src/glpapi15.c glp_write_graph     -> src/api/wrgr.c
        * src/glpapi15.c REMOVED
        * src/glpapi16.c glp_weak_comp       -> src/api/weak.c
        * src/glpapi16.c glp_strong_comp     -> src/api/strong.c
        * src/glpapi16.c glp_top_sort        -> src/api/topsort.c
        * src/glpapi16.c REMOVED
        * src/glpapi17.c glp_mincost_lp      -> src/api/mcflp.c
        * src/glpapi17.c glp_mincost_okalg   -> src/api/mcfokalg.c
        * src/glpapi17.c glp_mincost_relax4  -> src/api/mcfrelax.c
        * src/glpapi17.c glp_maxflow_lp      -> src/api/maxflp.c
        * src/glpapi17.c glp_maxflow_ffalg   -> src/api/maxffalg.c
        * src/glpapi17.c glp_check_asnprob   -> src/api/ckasn.c
        * src/glpapi17.c glp_asnprob_lp      -> src/api/asnlp.c
        * src/glpapi17.c glp_asnprob_okalg   -> src/api/asnokalg.c
        * src/glpapi17.c glp_asnprob_hall    -> src/api/asnhall.c
        * src/glpapi17.c glp_cpp             -> src/api/cpp.c
        * src/glpapi17.c REMOVED
        * src/glpapi18.c glp_wclique_exact   -> src/api/wcliqex.c
        * src/glpapi18.c REMOVED
        * src/glpapi19.c RENAMED             -> src/api/minisat1.c
        * src/glpapi20.c RENAMED             -> src/api/intfeas1.c
        * src/glpapi21.c RENAMED             -> examples/glpsol.c
        * src/glpcpx.c   RENAMED             -> src/api/cplex.c
        * src/glpdmx.c   glp_read_mincost    -> src/api/rdmcf.c
        * src/glpdmx.c   glp_write_mincost   -> src/api/wrmcf.c
        * src/glpdmx.c   glp_read_maxflow    -> src/api/rdmaxf.c
        * src/glpdmx.c   glp_write_maxflow   -> src/api/wrmaxf.c
        * src/glpdmx.c   glp_read_asnprob    -> src/api/rdasn.c
        * src/glpdmx.c   glp_write_asnprob   -> src/api/wrasn.c
        * src/glpdmx.c   glp_read_ccdata     -> src/api/rdcc.c
        * src/glpdmx.c   glp_write_ccdata    -> src/api/wrcc.c
        * src/glpdmx.c   glp_read_prob       -> src/api/rdprob.c
        * src/glpdmx.c   glp_write_prob      -> src/api/wrprob.c
        * src/glpdmx.c   glp_read_cnfsat     -> src/api/rdcnf.c
        * src/glpdmx.c   glp_write_cnfsat    -> src/api/wrcnf.c
        * src/glpdmx.c   glp_check_cnfsat    -> src/api/ckcnf.c
        * src/glpdmx.c   REMOVED
        * src/glpgmp.c   RENAMED             -> src/misc/mygmp.c
        * src/glpini01.c RENAMED             -> src/api/advbas.c
        * src/glpini02.c RENAMED             -> src/api/cpxbas.c
        * src/glpmps.c   RENAMED             -> src/api/mps.c
        * src/glpnet03.c RENAMED             -> src/api/netgen.c
        * src/glpnet04.c RENAMED             -> src/api/gridgen.c
        * src/glpnet05.c RENAMED             -> src/api/rmfgen.c

        The following source modules were changed due to changes in the
        data formats:
        * src/api/rdsol.c
        * src/api/wrsol.c
        * src/api/rdipt.c
        * src/api/wript.c
        * src/api/rdmip.c
        * src/api/wrmip.c

        * src/glpk.h
        New API routines were added: glp_mpl_init_rand (not documented
        yet), glp_time, glp_difftime. The API routine glp_main (glpsol
        main routine) was removed.

        * src/glpmpl.h, src/glpmpl01.c, src/glpmpl03.c
        The function tan (trigonometric tangent) was added to MathProg.
        Thanks to Chris Matrakidis <cmatraki@gmail.com> for patch.

        * src/simplex/spydual.c
        A minor typo in dual simplex (GLP_EITLIM instead of GLP_ETMLIM)
        was fixed. Thanks to Chris Matrakidis <cmatraki@gmail.com> for
        patch.

        * src/glpapi09.c, src/glpios01.c, src/glpios03.c
        A time limit problem was fixed. Thanks to Chris Matrakidis
        <cmatraki@gmail.com> for patch.

        * doc/gmpl_es.tex, doc/gmpl_es.pdf
        A new version of the document "Modeling Language GNU MathProg"
        in Spanish was included (in LaTeX and pdf formats). Thanks to
        Pablo Yapura <ypf@agro.unlp.edu.ar> for contribution.

        * configure.ac
        A check to determine if libtool needs '-no-undefined' flag to
        build shared libraries on some platforms was added.
        Thanks to Marco Atzeri <marco.atzeri@gmail.com> and Heinrich
        Schuchardt <xypron.glpk@gmx.de> for suggestion.

        * autogen.sh
        A script to regenerate the configure script and the Makefiles
        was added. Thanks to Heinrich Schuchardt <xypron.glpk@gmx.de>.

        * w32/glpk.def, w64/glpk.def
        'glp_at_error' symbol was added to the export list. Thanks to
        Heinrich Schuchardt <xypron.glpk@gmx.de> for bug report.

Sun Nov 08 12:00:00 2015 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.57 (38:0:2) has been released.

        * src/simplex/spy*.*
        New, more efficient implementation of the dual simplex method
        was included in the package.

        * src/simplex/spxprim.c
        Incorrect directive #ifdef USE_AT was changed to #if USE_AT.

        * src/simplex/simplex.h
        New header for simplex-based drivers was added.

        * src/glpspx02.c
        Old implementation of the dual simplex method was removed from
        the package.

        * src/glpspx.h
        Old header for simplex-based drivers was removed.

        * src/glpapi06.c
        Call to spx_dual was changed to spy_dual.
        tol_piv = 1e-10 in glp_init_smcp was changed to 1e-9 (this new
        tolerance seems to be more adequate for new implementations of
        the primal and dual simplex methods).

        * src/glpk.h, src/glpapi09.c, src/glpios03.c
        Option iocp.sr_heur to enable/disable simple rounding heuristic
        was added. Thanks to Chris Matrakidis <cmatraki@gmail.com> for
        suggestion.

        * src/env/env.h src/env/error.c
        API routine glp_at_error was added and documented. Thanks to
        Jeroen Demeyer <jdemeyer@cage.ugent.be> for suggestion.

        * src/glpapi19.c
        Translation of MiniSat solver (src/minisat) from C++ to C is
        made by a non-skilled programmer who converts pointers to ints
        and vice versa, so MiniSat works on 32-bit platforms only.
        Fixing this portability issue would require rewriting the code,
        so currently to prevent crashing the API routine glp_minisat1
        was changed just to report failure if 64-bit version of GLPK is
        used. Thanks to Heinrich Schuchardt <xypron.glpk@gmx.de> for
        bug report.

        * doc/glpk.tex, doc/gmpl.tex
        Some material was added according to changes in GLPK API.
        Also some minor typos were corrected. Thanks to Anton Voropaev
        <anton.n.voropaev@gmail.com> for typo report.

        * w32/makefiles, w64/makefiles
        Option /Zi was added to pass to MSVC compiler.

        examples/tsp/*.*
        An example application program TSPSOL was added. This program
        is intended to solve the Symmetric Traveling Salesman Problem.
        For more details see examples/tsp/README.

Thu Oct 01 12:00:00 2015 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.56 (37:3:1) has been released.

        * src/simplex/*.c, *.h
        New, more efficient and robust implementation of the primal
        simplex method was included in the package.

        * src/glpspx01.c
        Old implementation of the primal simplex method was removed
        from the package.

        * src/bflib/sgf.c
        A bug was fixed in routine sgf_reduce_nuc. (The bug appeared if
        the basis matrix was structurally singular.) Thanks to Martin
        Jacob <mj@bahntechnik.de> for bug report.

        * w32/*.*, w64/*.*
        Scripts to build GLPK with Microsoft Visual Studio 2015 were
        added. Thanks to Xypron <xypron.glpk@gmx.de> for contribution
        and testing.

Fri Aug 22 12:00:00 2014 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.55 (37:2:1) has been released.

        * src/bflib/luf.c, src/bflib/luf.h
        Two routines luf_vt_solve1 and luf_estimate_norm were added to
        estimate 1-norm of matrix inverse.

        * src/bflib/btf.c, src/bflib/btf.h
        Two routines btf_at_solve1 and btf_estimate_norm were added to
        estimate 1-norm of block triangular matrix inverse.

        * src/bflib/fhvint.c, src/bflib/fhvint.h
        The routine fhvint_estimate was added to estimate 1-norm of the
        basis matrix inverse (FHV-factorization).

        * src/bflib/scfint.c, src/bflib/scfint.h
        The routine scfint_estimate was added to estimate 1-norm of the
        basis matrix inverse (Schur-complement-based factorization).

        * src/bfd.c, src/bfd.c
        The routine bfd_condest was added to estimate the condition of
        the basis matrix.

        * src/bflib/scfint.h
        The prefix '_glp' was added to keep the namespace clean.

        * src/env/stream.c
        Two open modes "a" and "ab" were added. Thanks to Pedro P. Wong
        <d00604@taipower.com.tw> for bug report.

        * src/glpapi21.c (glpsol)
        Minor bug was fixed (command-line options --btf, --cbg, --cgr
        didn't work properly).

        * src/bflib/sgf.c
        A serious bug was fixed in a basis factorization routine used
        on the dense phase. (The bug might appear only if the number of
        rows exceeded sqrt(2**31) ~= 46,340 and caused access violtaion
        exception because of integer overflow.) Thanks to Mark Meketon
        <Marc.Meketon@oliverwyman.com> for bug report.

        * doc/glpk.tex
        Two API routines glp_alloc and glp_realloc were documented.
        Thanks to Brian Gladman <brg@gladman.plus.com> for suggestion.

        * doc/gmpl_es.tex, doc/gmpl_es.pdf
        Translation of the document "Modeling Language GNU MathProg"
        to Spanish was included (in LaTeX and pdf formats). Thanks to
        Pablo Yapura <ypf@agro.unlp.edu.ar> for contribution.

Fri Mar 28 12:00:00 2014 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.54 (37:1:1) has been released.

        * src/bflib/fhvint.h, fhvint.c
        Some technical changes were made.

        * src/bflib/btf.h, btf.c, btfint.h, btfint.c
        The module BTF was added to the package. It implements sparse
        block triangular factorization of a square non-singular matrix
        and is based on LU-factorization (see the LUF module).

        * src/bflib/scf.h, scf.c, scfint.h, scfint.c
        The module SCF was added to the package. It implements sparse
        factorization of a square non-singular matrix based on Schur
        complement and LU-factorization (plain or block triangular; see
        the LUF and BTF modules).

        * src/bfd.c
        LP basis factorization driver was changed to use most recent
        versions of the FHV and SCF modules.

        * src/glplpf.h, glplpf.c
        Old version of the Schur-complement-based factorization module
        was removed from the package.

        * src/glpk.h
        New flags GLP_BF_LUF, GLP_BF_BTF were added for glp_bfcp.

        * src/glpapi12.c
        The API routines glp_get_bfcp, glp_set_bfcp were replaced due
        to new version of the BFD module.

        * src/glpapi21.c
        New command-line options --luf, --btf, --ft, --cbg, and --cgr
        were added for the glpsol solver.

        * src/*
        According to a new version of the GNU Coding Standards in all
        messages a grave accent character (`) was replaced by a single
        apostrophe character (').

        * src/glpapi09.c mip status bug was fixed. Thanks to Remy Roy
        <remyroyster@gmail.com> for bug report.

        * doc/glpk.tex
        Some comments about invalidating the basis factorization were
        added. Thanks to Xypron <xypron.glpk@gmx.de> for suggestion.

        * configure.ac
        "iodbc-config --cflags" was added to detect iodbc flags. Thanks
        to Sebastien Villemot <sebastien@debian.org> for patch.

Thu Feb 13 12:00:00 2014 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.53 (37:0:1) has been released.

        * src/glpmps.c (glp_read_mps)
        The code was changed to remove free rows at the end.

        * src/glpcpx.c (glp_read_lp)
        A bug was fixed (explicit bounds for binaries not set). Thanks
        to Gabriel Hackebeil <gabehack@gmail.com> for bug report.

        * src/glpenv07.c (z_fgetc)
        A bug was fixed (Z_STREAM_END -> Z_OK). Thanks to Achim Gaedke
        <achim.gaedke@gmail.com> for bug report.

        * src/glpenv07.c
        Replaced by src/env/stream.c.

        * src/glpenv08.c
        Replaced by src/env/dlsup.c.

        * src/bflib/ifu.h, src/bflib/ifu.c
        Re-implemented.

        * src/glpscf.h, src/glpscf.c
        Replaced by IFU.

        * src/glplpf.h, src/glplpf.c
        Changed due to IFU.

        * src/glpbfd.c
        Changed due to LPF.

        * src/glpapi06.c
        Two API routines glp_get_it_cnt and glp_set_it_cnt were added.
        Thanks to Joey Rios <joeylrios@hotmail.com> for suggestion.

        * src/glplpx.h, src/glplpx01.c, src/glplpx02.c, src/glplpx03.c
        All obsolete API routines were completely removed.

        * examples/oldapi/lpx.h, examples/oldapi/lpx.c
        A set of routines that simulate the old GLPK API (as defined
        in 4.48) were added. Thanks to Jan Engelhardt <jengelh@inai.de>
        for suggestion.

        * src/zlib/*
        zlib 1.2.7 was downgraded to zlib 1.2.5 (from glpk 4.50) due to
        bugs detected in zlib 1.2.7 on some 64-bit platforms. Thanks to
        Carlo Baldassi <carlobaldassi@gmail.com> for bug report.

        * src/glpsql.c
        Alignment bug was fixed. Thanks to Xypron <xypron.glpk@gmx.de>
        for suggestion.

        * src/glpsql.c
        #include <my_global.h> and #include <my_sys.h> were commented
        out to fix a namespace bug on compiling with MariaDB. Thanks to
        Xypron <xypron.glpk@gmx.de> for suggestion.

Sun Jul 28 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.52.1 (36:1:0) has been released.

        * src/Makefile.am
        Version information bug was fixed. Thanks to Sebastien Villemot
        <sebastien@debian.org> for bug report.

        * src/proxy/proxy.c
        A minor bug (incorrect use of glp_term_out) was fixed.

        * src/glpios03.c
        The simple rounding heuristic routine was changed to check only
        global constraints.

        * src/glpcpx.c
        The code was changed to issue the warning message 'lower/upper
        bound redefined' only once.

Thu Jul 18 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.52 (36:0:1) has been released.

        * src/misc/wclique1.h, src/misc/wclique1.c
        Greedy heuristic to find maximum weight clique was implemented.

        * src/cglib/cfg.h, src/cglib/cfg.c, src/cglib/cfg1.c
        Conflict graph routines (used to generate clique cuts) were
        implemented.

        * src/glpios08.c
        New version of the clique cut generator was implemented. Now it
        is able to efficiently process very large and/or dense conflict
        graphs. Old rudimentary version was removed from the package.

        * examples/misp1.dat, examples/misp2.dat
        Two data files for the maximum independent set problem (MISP)
        were added to illustrate efficiency of using the clique cuts.

        * src/glpios03.c
        Simple rounding heuristic applied for every node subproblem was
        implemented.

        * proxy/proxy.c
        Some bugs were fixed in the proximity search heuristic routine.
        Thanks to Giorgio Sartor <0gioker0@gmail.com>.

        * src/glpapi21.c
        New command-line option '--proxy [nnn]' was added to glpsol to
        enable using the proximity search heuristic.

        * src/glpspx02.c
        A feature was added to switch to the primal simplex in case of
        stalling due to dual degeneracy (for GLP_DUALP only).

        * src/glpmps.c
        A bug (incorrect processing of LI column indicator) was fixed
        in the mps format reading routine. Thanks to Charles Brixko for
        bug report.

Wed Jun 19 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.51 (36:0:0) has been released.

        * src/bflib/sgf.c, src/bflib/sgf.h
        Singleton and dense phases of sparse Gaussian factorizer were
        implemented.

        * src/bflib/lufint.c, src/bflib/lufint.h
        Interface routines to LU-factorization were added.

        * src/bflib/fhvint.c, src/bflib/fhvint.h
        Interface routines to FHV-factorization were changed to use
        lufint.c routines.

        * src/glplpf.c, src/glplpf.h
        Routines implementing Schur-complement version of the LP basis
        factorization were changed to use lufint.c routines.

        * src/glpbfd.c, src/glpbfd.h
        Interface routines to the LP basis factorization were changed
        due to changes in glplpf.c routines.

        * src/glpluf.c, src/glpluf.c
        Old version of LU-factorization was removed from the package.
        (This old version was used for 10 years since 3.0.6.)

        * src/misc/triang.c, src/misc/triang.h
        Routine to find maximal triangular part of rectangular matrix
        was added.

        * src/glpini01.c
        The API routine glp_adv_basis that constructs advanced initial
        LP basis was replaced by an improved version, which (unlike the
        old version) takes into account numerical values of constraint
        coefficients.

        * src/proxy/*
        Routines that implement the proximity search heuristic for MIP
        were added. Thanks to Giorgio Sartor <0gioker0@gmail.com> for
        contribution.

        * src/glpk.h
        iocp.ps_heur was added to enable/disable proxy heuristic.

        * glpsol
        --proxy command-line option was added.

        * src/zlib/*.*
        zlib general purpose compression library, version 1.2.7,
        was ANSIfied and modified according to GLPK requirements and
        included in the distribution as an external software module.
        This version replaced the old one (1.2.5). For details please
        see src/zlib/README.

        * src/glpk.h, src/env/time.c
        The API routine glp_time was changed to return double rather
        than glp_long.

        * src/glplib02.c
        Routines that implement glp_long type (64-bit arithmetic) were
        removed from the package.

        * src/glpk.h, src/env/alloc.c
        New API routine glp_alloc was added. It makes obsolete two
        API routines glp_malloc and glp_calloc which were replaced by
        macros to use glp_alloc (hence 36:0:0).

        * src/glpios10.c
        A bug was fixed that caused numerical instability in the FPUMP
        heuristic (the bug was introduced in glpk 4.40).

Fri May 24 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.50 (35:0:0) has been released

        * src/Makefile.am
        Though API was not changed since 4.49, symbols _glp_lpx_* were
        removed from the export list, hence 35:0:0.

        * src/glpfhv.h, src/glpfhv.c
        Old routines for FHV-factorization were removed.

        * src/bflib/*.h, src/bflib/*.c
        New version of basis factorization routines, including routines
        for FHV-factorization, were added.

        * src/glpbfd.c
        LP basis factorization driver was changed according to the new
        routines for FHV-factorization.

        * doc/glpk.tex
        Some clarifications about using the name index routines were
        added. Thanks to Xypron <xypron.glpk@gmx.de> for suggestion.

        * doc/gmpl.tex
        Some typos were corrected.
        Thanks to Jeffrey Kantor <Kantor.1@nd.edu> for report.

        * src/glprlx.c
        A serious bug was *tentatively* fixed. This bug is inherited
        from the original Fortran version of the RELAX-IV code.
        Unfortunately, the code is very intricate, so this bug is still
        under investigation. Thanks to Sylvain Fournier for bug report.

        RELAX-IV bug details
        --------------------
        In the original RELAX-IV code there are four similar fragments
        in subroutines ascnt1 and ascnt2 like this:

        C
        C     DECREASE THE PRICES OF THE SCANNED NODES BY DELPRC.
        C     ADJUST FLOW TO MAINTAIN COMPLEMENTARY SLACKNESS WITH
        C     THE PRICES.
        C
              NB = 0
              DO 6 I=1,NSAVE
              . . .
                    IF (RC(ARC).EQ.0) THEN
                      DELX=DELX+U(ARC)
                      NB = NB + 1
                      PRDCSR(NB) = ARC
                    END IF
              . . .

        On some instances the variable NB becomes greater than N (the
        number of nodes) that leads to indexing error, because the
        array PRDCSR is declared as array of N elements (more
        precisely, as array of MAXNN elements, however, NB becomes even
        much greater than MAXNN).

Tue Apr 16 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.49 (34:0:0) has been released

        * glprlx.c, glprlx.h
        C version of the Fortran code RELAX-IV (relaxation method of
        Bertsekas and Tseng) was added.

        * glpapi17.c
        API routine glp_mincost_relax4, which is a driver to RELAX-IV
        code, was added and documented.

        * glpnet03.c
        API routine glp_netgen_prob (Klingman's standard network
        problems) was added and documented.

        * glpapi12.c
        A bug (wrong dual feasibility test) was fixed in API routine
        glp_warm_up. Thanks to David T. Price <dtprice@speakeasy.net>
        for bug report.

        * glpapi10.c
        Obsolete API routine lpx_check_kkt was replaced by API routine
        glp_check_kkt.

        * glpk.h
        All old API routines whose names begin with 'lpx_' were removed
        from API and no more available.

        * glpk.tex, graphs.tex
        These documents were essentially reformatted.

Mon Jan 28 12:00:00 2013 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.48 (33:0:0) has been released

        * src/glpmps.c
        A bug in glp_write_mps was fixed. Thanks to Raniere Gaia Costa
        da Silva for bug report.

        * glpk.h
        glp_prob declaration changed (now it is incomplete struct);
        glp_tree declaration changed (now it is incomplete struct);
        glp_tran declaration changed (now it is incomplete struct);
        glp_long declaration removed;
        glp_time declaration removed;
        glp_difftime removed from API;
        glp_data removed from API;
        glp_sdf_* removed from API;
        glp_mem_usage declaration changed (glp_long -> size_t);
        glp_realloc declaration added (not documented yet).

        * glpenv.h, glpenv05.c
        Dynamic memory allocation routines were reimplemented.

        * glpk.h, glpnet03.c
        Routine glp_netgen_prob was added (not documented yet).

        * configure.ac
        Check for gmp.h was added. Thanks to Heinrich Schuchardt for
        suggestion.

        * w32/glpk.def, w64/glpk.def
        Changes were made to export only API symbols.

Fri Sep 09 12:00:00 2011 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.47 (32:0:32) has been released

        * src/glpapi20.c
        New API routine glp_infeas1 to solve 0-1 feasibility problem
        was added and documented (see doc/cnfsat.pdf).

        * src/glpnpp06.c
        Some new preprocessor routines for SAT-CNF encoding, which are
        used by the routine glp_intfeas1, were added.

        * src/glpnpp.h
        The header was modified due to additions.

        * src/glpapi21.c
        The glpsol solver was modified to bypass model postprocessing
        if the solution reported is neither optimal nor feasible.

        * src/glpapi21.c
        New glpsol options (--minisat and --objbnd) were added.

        * examples/pbn/*.*
        The paint-by-numbers puzzle model (pbn.mod) was modified to
        print solution in PostScript format and to check for multiple
        solutions. Some benchmark examples from <webpbn.com> encoded
        in MathProg were included in the distribution. For more details
        see examples/pbn/README and examples/pbn/pbn.pdf.

        * examples/Makefile.am
        A minor bug was fixed to correctly build glpk in a separate
        directory. Thanks to Marco Atzeri <marco.atzeri@gmail.com> for
        bug report.

Tue Aug 09 12:00:00 2011 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.46 (31:0:31) has been released

        * src/glpk.h, src/Makefile
        glpk.h was relocated from 'include' to 'src', and 'include'
        subdir was removed; src/Makefile.am was changed appropriately.

        * src/zlib/*.*
        zlib general purpose compression library, version 1.2.5,
        was ANSIfied and modified according to GLPK requirements and
        included in the distribution as an external software module.

        For details see src/zlib/README.

        * src/glpdmx.c
        The following new API routines were added:
        glp_read_cnfsat  - read CNF-SAT problem data in DIMACS format
        glp_check_cnfsat - check for CNF-SAT problem instance
        glp_write_cnfsat - write CNF-SAT problem data in DIMACS format

        * src/minisat/*.*
        MiniSat, a CNF-SAT solver, version 1.14.1, was ANSIfied and
        modified according to GLPK requirements and included in the
        distribution as an external software module.

        For details see minisat/README and minisat/LICENSE.

        * src/glpapi19.c
        The API routine glp_minisat1, which is a driver to the MiniSat
        solver, was included in the package.

        * doc/satcnf.*
        The document "CNF Satisfiability Problem" was included in the
        package. It is a supplement to the GLPK Reference Manual.

        * src/glpapi20.c
        New glpsol options (--cnf, --wcnf, and --minisat) was added.

        * glpsql.c
        Some bugs were fixed. Thanks to Xypron <xypron.glpk@gmx.de>.

Sun Dec 05 12:00:00 2010 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.45 (30:0:30) has been released

        * glplpx01.c
        A bug (it_cnt) in routine reset_parms was fixed.
        Thanks to Ali Baharev <ali.baharev@gmail.com> for report.

        * glpmpl03.c
        A bug (print "text\") was fixed.
        Thanks to Xypron <xypron.glpk@gmx.de> for report.

        * glpsql.c
        A precision bug was fixed.
        Thanks to Xypron <xypron.glpk@gmx.de>.

        * glpk.tex
        Some typos were corrected.
        Thanks to Robbie Morrison <robbie@actrix.co.nz>.

Thu Jun 03 12:00:00 2010 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.44 (29:0:29) has been released

        * glpapi14.c glpmpl.h glpmpl01.c glpmpl03.c glpmpl04.c
        Implemented suffixes for variables and constraints.

        * glpmpl06.c
        Made changes to allow comment records in CSV files.

        * glpapi17.c
        Added and documented new API routine glp_cpp to solve Critical
        Path Problem.

Sat Feb 20 12:00:00 2010 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.43 (28:0:28) has been released

        * glplib.h, glplib.c, glpenv.h, glpenv.c
        The module glpenv was split into two modules glpenv and glplib.

        * glpenv01.c, glpenv03.c, glpenv04.c, glpenv06.c
        The following new API routines were added and documented:
        glp_init_env, glp_free_env, glp_open_tee, glp_close_tee,
        glp_error (macro), glp_difftime.

        * glpapi16.c
        New API routine glp_top_sort (topological sorting of ayclic
        digraph) was added and documented.

        * glpapi17.c
        A serious bug was fixed in the routine glp_asn_prob_hall.

        * glpnpp05.c
        A bug was fixed in the LP/MIP preprocessor (hidden covering
        inequalities).

        * glpsql.c
        Some improvements were made in the table driver (NULL data).
        Thanks to Xypron <xypron.glpk@gmx.de> for contribution.

        * configure.ac
        Changes were made to use .dylib rather than .so under Mac OS.
        Thanks to Noli Sicad <nsicad@gmail.com> for testing

Wed Jan 13 12:00:00 2010 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.42 (27:0:27) has been released

        * glpapi01.c, glpapi11.c, glpapi12.c, glpdmx.c
        The following new API routines were added and documented:
        glp_check_dup (check for duplicate elements in sparse matrix);
        glp_sort_matrix (sort elements of the constraint matrix);
        glp_read_prob (read problem data in GLPK format);
        glp_write_prob (write problem data in GLPK format);
        glp_analyze_bound (analyze active bound of non-basic variable);
        glp_analyze_coef (analyze obj. coefficient at basic variable);
        glp_print_ranges (print sensitivity analysis report; replaces
        lpx_print_sens_bnds).

        * glpapi20.c
        New command-line options were added to glpsol:
        --glp (read problem data in GLPK format);
        --wglp (write problem data in GLPK format);
        --lp (replaces --cpxlp);
        --wlp (replaces --wcpxlp);
        --ranges (print sensitivity analysis report).

        * glpapi06.c
        In the routine glp_init_smcp default value of the parameter
        out_frq was changed to 500 (it was 200).

        * glpipp.h, glpipp01.c, glpipp02.c
        The old MIP preprocessor module was removed.

        * glpapi09.c
        Now the MIP solver uses the new MIP preprocessor (NPP).

        * glplpx03.c
        lpx_write_opb was disabled due to replacing IPP with NPP.

        * glpnet09.c
        Kellerman's heuristic to cover edges by cliques was added.

        * glplib08.c
        Recognition of special filenames "/dev/stdin", "/dev/stdout",
        and "/dev/stderr" was added.

        * glpk.tex
        Chapter "Graph and network routines" was carried out from the
        reference manual as a separate document.

Mon Dec 21 12:00:00 2009 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.41 (26:0:26) has been released

        * glpapi12.c
        The following new API routines were added:
        glp_transform_row (replaces lpx_transform_row);
        glp_transform_col (replaces lpx_transform_col);
        glp_prim_rtest (replaces lpx_prim_ratio_test);
        glp_dual_rtest (replaces lpx_dual_ratio_test).
        Note that values returned by glp_prim_rtest and glp_dual_rtest
        differ from the ones retutned by the deprecated routines.

        * glpnpp*.*
        The LP/MIP preprocessor was essentially re-implemented.

        * glpios03.c
        The feature to remove inactive cuts from the active subproblem
        was implemented.

        * glpios11.c
        The feature processing cuts stored in the cut pool was improved
        (now it uses estimation of objective degradation).

        * glpscg.*
        Obsolete implemetation of the conflict graph was removed.

        * glpmpl.h, glpmpl03.c, glpmpl04.c
        FILE was replaced by XFILE to allow using GLPK I/O routines.

        * glpsql.c, examples/sql, doc/tables.tex
        The SQL table driver was changed to allow multiple arguments
        separated by semicolon in SQL statements. Thanks to Xypron
        <xypron.glpk@gmx.de>.

        * glpk.h, glpapi14.c
        New API routine glp_time was added (not documented yet).

        * glpapi20.c
        Two new options were added to glpsol: --seed value (initialize
        pseudo-random number generator used in MathProg model with
        specified seed value), and --ini filename (use as initial basis
        previously saved with -w option).

        * examples/xyacfs.mod
        Thanks to Nigel Galloway <nigel_galloway@operamail.com> for
        contribution.

        * examples/dbf/*.*
        Thanks to Noli Sicad <nsicad@gmail.com> for contribution.

        * w32/*.*, w64/*.*
        Scripts to build GLPK with Microsoft Visual Studio 2010 were
        added. Thanks to Xypron <xypron.glpk@gmx.de> for contribution
        and testing.

Tue Nov 03 12:00:00 2009 Andrew Makhorin <mao@gnu.org>

        * GLPK 4.40 (25:0:25) has been released

        * glpdmx.c
        Two new API routines were added:
        glp_read_ccdata (read graph in DIMACS clique/coloring format);
        glp_write_ccdata (write graph in DIMACS clique/coloring format).
        Also an example file examples/sample.col was added.

        * glpapi19.c, glpnet08.c
        New API routine glp_wclique_exact was added. It is intended to
        find a maximum weight clique with the exact algorithm developed
        by Prof. P. Ostergard.

        * glpnpp02.c
        A bug was fixed in the LP preprocessor (routine npp_empty_col).
        Thanks to Stefan Vigerske <stefan@math.hu-berlin.de> for the
        bug report.

        * glpios10.c
        A bug was fixed and some improvements were made in the FPUMP
        heuristic module. Thanks to Xypron <xypron.glpk@gmx.de>.

        * glpapi12.c
        A bug was fixed in the API routine glp_warm_up (dual
        feasibility test was incorrect in maximization case). Thanks to
        Uday Venkatadri <Uday.Venkatadri@dal.ca> for the bug report.

        * glpapi16.c
        Two new API routines were added:
        glp_del_vertices (remove vertices from graph);
        glp_del_arc (remove arc from graph).

        * glpios09.c
        The hybrid pseudocost branching heuristic was included in the
        MIP solver. It is available on API level (iocp.br_tech should
        be set to GLP_BR_PCH) and in the stand-alone solver glpsol
        (via the command-line option --pcost). This heuristic may be
        useful on solving hard MIP instances.

        * glpios03.c
        The branching heuristic by Driebeck and Tomlin (used in the
        MIP solver by default) was changed to switch to branching on
        most fractional variable if an lower bound of degradation of
        the objective is close to zero for all branching candidates.

Sun Jul 26 12:00:00 2009 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.39 (24:0:24) has been released

        * glpsdf.c
        New API routines to read plain data files were added.

        * glpcpx.h, glpini.h, glpscl.h
        These headers were removed.

        * glpcpx.c
        API routines glp_read_lp and glp_write_lp to read/write files
        in CPLEX LP format were re-implemented. Now glp_write_lp
        correctly writes double-bounded (ranged) rows by introducing
        slack variables rather than by duplicating the rows. The data
        structure glp_cpxcp and routine glp_init_cpxcp were added.

        * amd/*
        The 'xfree(NULL)' bug was fixed in the AMD routines. Thanks to
        Niels Klitgord <niels@bu.edu> for the bug report.

        * glpapi16.c
        New API routines glp_set_vertex_name, glp_create_v_index,
        glp_find_vertex, and glp_delete_v_index were added.

        * glpdmx.c
        New API routines glp_read_asnprob, glp_write_asnprob,
        glp_read_ccformat, and glp_write_ccformat were added (the two
        latter routines are not documented yet).

        * glpapi18.c
        New API routines glp_check_asnprob, glp_asnprob_lp,
        glp_asnprob_okalg, and glp_asnprob_hall were added.

        * glpini01.c, glpini02.c
        The message "Crashing..." was changed to "Constructing initial
        basis..." due to suggestion by Thomas Kahle <tom111@gmx.de>.

        * glpapi14.c
        New API routines glp_printf, glp_vprintf, glp_malloc,
        glp_calloc, glp_free, and glp_assert were added.

        * glplpp.h, glplpp01.c, glplpp02.c
        Old LP presolver routines were removed. Now glp_simplex uses
        new preprocessing routines (see glpnpp).

        * glpapi12.c
        New API routine glp_warm_up was added; it replaces the routine
        lpx_warm_up.

Sat May 02 12:00:00 2009 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.38 (23:0:23) has been released

        * glpmps.c
        API routines to read/write MPS files were re-implemented.

        * glpspx02.c
        Some improvements were made in the dual simplex routine.

        * glpk.h
        New structure glp_iptcp was added.

        * glpnpp.h, glpnpp01.c, glpnpp02.c
        New LP/MIP preprocessor. Currently it includes only some basic
        routines and used only in the interior-point solver.

        * glpapi08.c
        API routine glp_interior was replaced by an improved version
        (new LP/MIP preprocessor, new ordering algorithms).

        New API routine glp_init_iptcp was added.

        API routine glp_ipt_status may return two new statuses due to
        changes in glp_interior.

        * glpsol.c
        New command-line options were added (ordering algorithm used in
        the interior-point solver).

        * amd/*.*, colamd/*.*
        Two external software modules AMD and COLAMD/SYMAMD used in the
        interior-point solver were included in the distribution.

        For details see amd/README and colamd/README.

        * glpnet03.c, glpnet04.c, glpnet05.c
        A minor bug was fixed (_G => G_). Thanks to Nelson H. F. Beebe
        <beebe@math.utah.edu> for bug report.

Sun Mar 29 12:00:00 2009 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.37 (22:0:22) has been released

        * glpk.h
        iocp.fp_heur was added to enable/disable fpump heuristic.

        * glpios10.c
        ios_feas_pump was added (feasibility pump heuristic).

        * glpsol.c
        --fpump command-line option was added.

        * glpsds.c
        Plain data set routines were added to facilitate reading plain
        data in application programs. Currently these routines are not
        in API, though declared in glpk.h.

        * glpapi08.c
        A bug was fixed in the internal routine restore. (Due to this
        bug dual solution components were computed incorrectly if the
        problem was scaled.)

        * glpapi10.c, glpapi11.c
        The following new API routines were added:
        glp_print_sol (replaces lpx_print_sol);
        glp_print_ipt (replaces lpx_print_ips);
        glp_print_mip (replaces lpx_print_mip);
        _glp_check_kkt (replaces lpx_check_kkt, lpx_check_int).
        Now the routine lpx_print_prob (deprecated) is equivalent to
        the routine glp_write_lp.

        * glpapi18.c, glpapi19.c
        The following new API routines were added:
        glp_read_graph (read graph from plain text file);
        glp_write_graph (write graph to plain text file);
        glp_weak_comp (find all weakly connected components);
        glp_strong_comp (find all strongly connected components).

        * configure.ac, Makefile.am
        Changes were made: (a) to allow using autoreconf/autoheader;
        (b) to allow building glpk in a directory other than its source
        directory. Thanks to Marco Atzeri <marco_atzeri@yahoo.it> for
        bug report.

        * examples/shiftcover.mod
        An example model in MathProg was added.
        Thanks to Larry D'Agostino <Larry.D'Agostino@gmacrescap.com>
        for contribution.

Fri Feb 06 12:00:00 2009 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.36 (21:0:21) has been released

        * glpnet06.c, glpnet07.c, glpapi19.c
        The following new API routines were added:
        glp_mincost_okalg     find minimum-cost flow with out-of-kilter
                              algorithm
        glp_maxflow_ffalg     find maximal flow with Ford-Fulkerson
                              algorithm

        * glpsol.c
        Two new command-line options were added:
        --mincost             read min-cost flow data in DIMACS format
        --maxflow             read maximum flow data in DIMACS format

        * doc/glpk.*
        New edition of the reference manual was included.

        * glpk.h
        Duplicate symbols were removed to allow using swig.
        Thanks to Kelly Westbrooks <kellywestbrooks@yahoo.com> and
        Nigel Galloway <nigel_galloway@operamail.com> for suggestion.

        * glpcpx.c
        A minor defect was fixed in the routine glp_write_lp.
        Thanks to Sebastien Briais <sbriais@free.fr> for bug report.

        * glpsql.c
        A minor bug was fixed. Thanks to Xypron <xypron.glpk@gmx.de>
        for patch.

        * examples/hashi.mod, examples/shikaku.mod
        Two example models in MathProg were added. Thanks to Sebastian
        Nowozin <nowozin@gmail.com> for contribution.

        * examples/qfit.mod, examples/yacfs.mod
        Two example models in MathProg were added. Thanks to Nigel
        Galloway <nigel_galloway@operamail.com> for contribution.

Fri Jan 09 12:00:00 2009 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.35 (20:0:20) has been released

        * glpk.h, glpapi.c, glpnet.c
        The following new API routines were added:
        glp_create_graph      create graph
        glp_set_graph_name    assign (change) graph name
        glp_add_vertices      add new vertices to graph
        glp_add_arc           add new arc to graph
        glp_erase_graph       erase graph content
        glp_delete_graph      delete graph
        glp_read_mincost      read minimum cost flow problem data in
                              DIMACS format
        glp_write_mincost     write minimum cost flow problem data in
                              DIMACS format
        glp_mincost_lp        convert minimum cost flow problem to LP
        glp_netgen            Klingman's network problem generator
        glp_gridgen           grid-like network problem generator
        glp_read_maxflow      read maximum flow problem data in DIMACS
                              format
        glp_write_maxflow     write maximum flow problem data in DIMACS
                              format
        glp_maxflow_lp        convert maximum flow problem to LP
        glp_rmfgen            Goldfarb's maximum flow problem generator

        * doc/glpk.*
        New edition of the reference manual was included.

        * examples/sample.min, examples/sample.max
        Two example data files in DIMACS format were added.

        * glplib04.c
        The statement "if (c = '\n') fflush(stdout)" was added to the
        internal routine xputc to provide "real-time" terminal output.
        Thanks to Luiz Bettoni <bettoni@cpgei.ct.utfpr.edu.br> for
        suggestion.

        * glpmpl05.c
        A minor bug was fixed in the internal routine mpl_fn_time2str.
        Thanks to Stefan Vigerske <stefan@vigerske.de> for bug report.

        * w32/makefile, w64/makefile
        The flag -O2 (/O2) was added to some makefiles.

Thu Dec 04 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.34 (19:0:19) has been released

        * src/glpios03.c
        A bug was fixed in the internal routine branch_on. Thanks to
        Nigel Galloway <nigel_galloway@operamail.com> for bug report.

        * src/glpmpl05.c
        Three new MathProg functions were included:
        gmtime    obtaining current calendar time
        str2time  converting character string to calendar time
        time2str  converting calendar time to character string
        Thanks to Xypron <xypron.glpk@gmx.de>.

        * doc/glpk.*, doc/gmpl.*
        A new edition of the GLPK reference manual and GNU MathProg
        language description were included.

Thu Oct 30 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.33 (18:0:18) has been released

        * glpapi*.*
        The following new API routines were added:
        glp_copy_prob         copy problem object content
        glp_exact             solve LP in exact arithmetic
                              (makes lpx_exact deprecated)
        glp_get_unbnd_ray     determine variable causing unboundedness
                              (makes lpx_get_ray_info deprecated)
        glp_interior          solve LP with interior-point method
                              (makes lpx_interior deprecated)

        * glpapi*.*
        The following new API routines for processing models written in
        the GNU Mathprog language were added to the package:
        glp_mpl_alloc_wksp    allocate the translator workspace
        glp_mpl_read_model    read and translate model section
        glp_mpl_read_data     read and translate data section
        glp_mpl_generate      generate the model
        glp_mpl_build_prob    build LP/MIP instance from the model
        glp_mpl_postsolve     postsolve the model
        glp_mpl_free_wksp     deallocate the translator workspace
        (These routines make lpx_read_model deprecated.)

        * src/glpapi17.c, examples/glpsol.c
        The stand-alone solver glpsol was re-implemented with new API
        routines.

        * src/glpsql.c
        Some bugs were fixed in the SQL table driver. Thanks to Xypron
        <xypron.glpk@gmx.de>.

        * examples/cplex/*.*
        A crude implementation of CPLEX-like interface to GLPK API was
        added to the package. See examples/cplex/README.

Fri Oct 03 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.32 (17:0:17) has been released

        * glpmpl01.c
        A bug was fixed. Due to this bug iterated expressions having
        an indexing expression whose dummy indices are bound to some
        values, i.e. like sum{(i+1,j,k-1) in E} x[i,j,k] are evaluated
        incorrectly. Namely, current value of such expressions is not
        invalidated when corresponding dummy indices (like i and k in
        the example above) are changed, that erroneously results in the
        same value evaluated for the first time.

        * glpios03.c
        Euclidean reduction of the local objective bound was added in
        the routine glpios03.c.

        * glpapi11.c
        The following new branch-and-cut API routines were added:
        glp_ios_row_attr      determine additional row attributes;
        glp_ios_pool_size     determine current size of the cut pool;
        glp_ios_add_row       add constraint to the cut pool;
        glp_ios_del_row       delete constraint from the cut pool;
        glp_ios_clear_pool    delete all constraints from the cut pool.

        * glpapi08.c
        The following new features were included in the branch-and-cut
        solver (the API routine glp_intopt):
        MIP presolver;
        mixed cover cut generator;
        clique cut generator.
        Due to the MIP presolver glp_intopt may additionally return
        GLP_ENOPFS and GLP_ENODFS, if primal or dual infeasibility of
        LP relaxation is detected by the presolver. Also the return
        code GLP_EMIPGAP was introduced to correctly indicate that the
        mip gap tolerance is reached.

        * glplpx01.c
        Now the obsolete API routines lpx_integer and lpx_intopt are
        completely superseded by the API routine glp_intopt that makes
        them deprecated.

        * glpmpl05.c
        Now the table driver name "iODBC" can be specified as "ODBC".

        * glpmpl03.c
        A bug fixed in the routine free_dca.
        Thanks to Xypron <xypron.glpk@gmx.de>.

        * glpsql.c
        A bug was fixed in the SQL table driver.
        Thanks to Xypron <xypron.glpk@gmx.de>.

        * examples/glpsol.c
        Changes were made to allow multiple MathProg data files.

        * doc/glpk.*
        A new edition of the GLPK reference manual was included.

        * doc/tables.*
        A new edition of the supplement "Using data tables in the GNU
        MathProg language" was included.

Tue Sep 02 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.31 (16:0:16) has been released

        * glpspx.h, glpspx01.c, glpspx02.c, glpapi06.c
        The dual simplex solver (spx_dual_opt) was replaced by a new
        implementation of the two-phase dual simplex method (spx_dual).
        Old simplex method routines (spx_prim_opt, spx_prim_feas, and
        spx_dual_opt) were removed from the package.

        * glpk.h, glpscl.h, glpscl.c, glpapi04.c
        New API routine glp_scale_prob was added. It replaces routine
        lpx_scale_prob which is deprecated.

        * glpk.h, glpini.h, glpini01.c, glpini02.c, glpapi05.c
        New API routines glp_std_basis, glp_adv_basis, glp_cpx_basis
        were added. They replace routines lpx_std_basis, lpx_adv_basis,
        lpx_cpx_basis which are deprecated.

        * glpdmp.c
        8-byte data alignment was added to the module (sufficient for
        both ILP32 and LP64 environments).

        * glplib07.c
        16-byte data alignment was added to the module to provide
        compatibility with LP64 environment (8-byte is not sufficient
        due to jmp_buf; thanks to Xypron for investigation).

        * glplpx16.c
        New version of the routine lpx_write_pb was added. Thanks to
        Oscar Gustafsson <oscarg@isy.liu.se> for the contribution.

        * w32/VC9, w64/VC9
        Makefiles and batch files were added to build GLPK under 32-
        and 64-bit Windows with Microsoft Visual Studio Express 2008.
        Thanks to Heinrich Schuchardt <heinrich.schuchardt@gmx.de> for
        the contribution and testing.

        * w32/DM, w32/OWC
        Makefiles and batch files were added to build GLPK with Digital
        Mars C/C++ 8.50 and Open Watcom C/C++ 1.6 (32-bit Windows).

Wed Aug 13 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.30 (15:0:15) has been released

        * glpspx.h, glpspx03.c, glpapi06.c
        The primal simplex solver (spx_prim_opt, spx_prim_feas) was
        replaced by a new implementation (spx_primal), which currently
        provides the same features as the old version.

        * glpmpl01.c, glpmpl03.c
        Some changes were made in the MathProg translator to allow <,
        <=, >=, and > on comparing symbolic values. Thanks to Heinrich
        Schuchardt <heinrich.schuchardt@gmx.de> for patches.

        * glplpx10.c
        Internal routine set_d_eps in the exact LP solver was changed
        to prevent approximation errors in case of integral data.
        Thanks to Markus Pilz <pilz@cs.uni-bonn.de> for bug report.

XXX XXX XX 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.29 (14:0:14) has been released

        * configure.ac
        The configure script was changed to disable optional features
        by default. For details see file INSTALL.

        * glpipp02.c
        A bug was fixed in the internal routine reduce_bounds. Thanks
        to Anne-Laurence Putz <anne-laurence.putz@eurodecision.com> for
        the bug report.

        * glpapi01.c
        New API routine glp_erase_prob was added.

        * glpapi13.c
        New API routines glp_read_mps and glp_write_mps were added.
        They replace API routines lpx_read_mps, lpx_read_freemps,
        lpx_write_mps, and lpx_write_freemps, which are deprecated.

        * glpapi14.c
        New API routines glp_read_lp and glp_write_lp were added. They
        replace API routines lpx_read_cpxlp and lpx_write_cpxlp, which
        are deprecated.

        * glpsql.c
        Minor bug was fixed. Thanks to Xypron <xypron.glpk@gmx.de> for
        the bug report.

Tue Mar 25 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.28 (13:0:13) has been released

        * glplib.h, glplib.c
        Three wrapper routines xdlopen, xdlsym, and xdlclose, which
        provide the shared library support, were added. A particular
        version of these routines depends on the option --enable-dl
        passed to the configure script (see file INSTALL for details).
        Thanks to Rafael Laboissiere <rafael@debian.org> for useful
        advices concerning the shared library support.

        * glpsql.c
        A static linking to iODBC and MySQL libraries used in the
        MathProg table drivers was replaced by a dynamic linking to
        corresponding shared libraries.
        Many thanks to Heinrich Schuchardt <heinrich.schuchardt@gmx.de>
        for the contribution and to Vijay Patil <vijay.patil@gmail.com>
        for testing this feature under Windows XP.

        * glpgmp.h, glpgmp.c
        A bug (which appeared only on 64-bit platforms) was fixed.
        Thanks to Axel Simon <Axel.Simon@ens.fr> for the bug report.

        * glpapi.c
        A bug was fixed in the api routine glp_add_cols. (If the basis
        is valid, adding column keeps it valid, however, col->bind was
        set to -1 rather to 0.)
        Thanks to Cedric[FR] <fox2113@wanadoo.fr> for the bug report.

        * glplib.c
        64-bit unsigned int type glp_ulong and corresponding routines
        were replaced by 64-bit signed int type xlong_t.

        * glpk.h, glpapi.c
        The type glp_ulong was replaced by glp_long. This affects only
        the api routine glp_mem_usage.

        * glplib.c
        Compressed data file support was added. This feature requires
        the zlib data compression libraries and allows compressing and
        decompressing .gz files "on the fly".

        * glpcli.h, glpcli.c
        Command-line interface routines were added. (This feature is
        incomplete so far.)

Sun Mar 02 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.27 (12:0:12) has been released

        * glpsql.h, glpsql.c
        Two MathProg table drivers for iODBC and MySQL contributed by
        Heinrich Schuchardt <heinrich.schuchardt@gmx.de> were added to
        the package.

        * glpmpl05.c
        Mathprog table driver for xBASE was added to the package.

        * glpmpl03.c
        A minor was fixed in the MathProg translator (if some field
        specified in the table statement is missing in corresponding
        input table, the bug causes abnormal termination). Thanks to
        Heinrich Schuchardt <heinrich.schuchardt@gmx.de> for the bug
        report.

        * glpmpl.h, glpmpl.c
        STRING data type was replaced by plain character strings.

Sun Feb 17 12:00:00 2008 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.26 (11:0:11) has been released

        * glpmpl.h, glpmpl01.c, glpmpl03.c, glpmpl05.c
        The table statement was implemented. Description of this new
        feature is given in file doc/tables.txt.

        * glpios03.c
        A bug causing zero divide error on computing euclidean norm of
        the cut coefficient vector was fixed.

Wed Dec 19 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.25 (10:0:10) has been released

        * glpapi10.c
        Routines lpx_eval_tab_row and lpx_eval_tab_col were replaced by
        glp_eval_tab_row and glp_eval_tab_col.

        * glpios03.c, glpios05.c
        Gomory's mixed integer cuts were implemented.

        * glpscs.h, glpscs.c
        Segmented character string routines are no longer used and were
        removed from the package.

Wed Nov 21 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.24 (9:0:9) has been released

        * src/glplpx16.c
        A bug was fixed in the routine lpx_write_cpxlp. If a variable
        x has upper bound and no lower bound, it should appear in the
        bounds section as "-inf <= x <= u", not as "x <= u". Thanks to
        Enric Rodriguez <erodri@lsi.upc.edu> for the bug report.

        * src/glpios03.c, src/glpios04.c, src/glpios05.c
        MIR (mixed integer rounding) cuts were implemented.

Sun Oct 28 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.23 (8:0:8) has been released

        * src/glplib05.c, configure.ac
        Check for vsnprintf was added.

        * include/glppds.h, src/glppds.c
        A module to scan plain data was added.

        * src/glpapi09.c
        The following new API routines were added:
        glp_read_sol    read basic solution from text file;
        glp_write_sol   write basic solution to text file;
        glp_read_ipt    read interior-point solution from text file;
        glp_write_ipt   write interior-point solution to text file;
        glp_read_mip    read MIP solution from text file;
        glp_write_mip   write MIP solution to text file.

        * src/glpapi12.c
        Advanced API routine glp_free_env was added.

        * examples/glpsol.c
        The following three command-line options were added:
        --mipgap tol    set relative MIP gap tolerance
        -r filename     read solution from filename
        -w filename     write solution to filename

Wed Sep 19 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.22 (7:0:7) has been released

        * src/glpios02.c
        A bug was fixed in the MIP preprocessor (ios_preprocess_node).
        Thanks to Roberto Bagnara <bagnara@cs.unipr.it> (Department of
        Mathematics, University of Parma, Italy) for the bug report.

        * src/glpios02.c
        A bug was fixed in the MIP preprocessor (col_implied_bounds),
        due to which constraint coefficients with small magnitude could
        lead to wrong implied bounds of structural variables.

        * src/glpipp02.c
        A similar bug was fixed in the routine reduce_bounds.

        * src/glpapi01.c
        A bug was fixed in the routines glp_set_mat_row and
        glp_set_mat_col. (The bug appeared due to incorrect removing
        zero elements from the row/column lists.)

        * src/glplpx14.c
        A bug was fixed in the API routines lpx_read_mps and
        lpx_read_freemps, due to which bounds of type LI specified in
        BOUNDS section were incorrectly processed.

        * src/glplib05.c
        A call to standard function vsprintf was replaced by a call to
        vsnprintf for security reasons. Many thanks to Peter T. Breuer
        <ptb@inv.it.uc3m.es> and Rafael Laboissiere <rafael@debian.org>.

Tue Aug 28 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.21 (6:0:6) has been released

        * glpscg.h, glpscg.c
        Routines to maintain sparse cliqued graph were added.

        * glpios02.c
        MIP preprocessing routines were added.

        * glpk.h, glpios.h, glpios03.c
        New reasons for calling the callback routine were introduced
        in the MIP solver.

        * glpapi08.c
        Default backtracking strategy was changed to best local bound.

        * glpapi11.c
        New API routine glp_term_out to enable/disable terminal output
        was added.

        * glprng.h, glprng02.c
        Two routines to generate uniformly distributed pseudo-random
        floating-point numbers were added.

Thu Jul 26 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.20 (5:0:5) has been released

        * glpk.h, glpapi08.c
        The routine lpx_integer was replaced by an equivalent routine
        glp_intopt. Also new API routine glp_init_iocp was added.

        * glpiet.h, glpiet.c
        Routines implementing the implicit enumeration tree are
        no longer used and therefore were removed from the package.

        * glpios.h, glpios01.c, glpios02, glpios03
        Routines implementing the integer optimization suite being
        replaced by a new version were removed from the package.

        * glpmip.h, glpmip01.c, glpmip02.c

        Routines implementing the B&B method being replaced by a new
        version were removed from the package.

        * glpios.h, glpios01.c, glpios02.c

        Routines implementing a new version of the integer optimization
        suite (IOS) based on the B&B method were added to the package.

        * glpk.h, glpapi10.c
        Branch-and-bound interface routines were added to the package.

        * examples/tspsol.c
        The TSP solver based on old version of the integer optimization
        suite is no more supported and was removed from the package.

        * glpipp02.c
        An error in the routine reduce_bounds was fixed; thanks to
        Graham Rockwell <bionomicron@gmail.com> for the bug report.

        * glpk.latex
        A new edition of the reference manual was included.

Thu Jul 05 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.19 (4:0:4) has been released

        The principal change is upgrading to GPLv3.

        * glpapi01.c
        A serious bug in the routine glp_del_cols was fixed; thanks to
        Cedric[FR] <fox2113@wanadoo.fr> for the bug report. The bug
        appeared because on deleting non-basic columns the basis header
        remained valid, however, contained invalid (old) column ordinal
        numbers.

        * glpapi10.c
        A new advanced API routine glp_mem_limit was added.

        * glplpx01.c
        The case GLP_EBOUND was added to the routine lpx_simplex.
        Thanks to Cameron Kellough <Cameron.Kellough@sri.com> for the
        bug report.

        * glplpx19.c
        An API routine lpx_write_pb to write the problem instance in
        OPB (pseudo boolean) format format was added. Thanks to Oscar
        Gustafsson <oscarg@isy.liu.se> for the contribution.

        * glpsol.c
        Two new options --wpb and --wnpb were added to glpsol to write
        the problem instance in OPB format.

Mon Jun 25 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.18 (3:0:3) has been released

        * glplib.h
        Type names ulong_t and uldiv_t were changed to glp_ulong and
        glp_uldiv to avoid conflicts with standard type names on some
        platforms. Thanks to Boris Wirtz <Boris.Wirtz@uni-oldenburg.de>
        for the bug report.

        * glpbfd.*, glpfhv.*, glplpf.*
        LP basis factorization routines were made tidy.

        * glpk.h, glpapi04.c
        The following API routines were added:
        glp_set_rii, glp_set_sjj, glp_get_rii, glp_get_sjj.

        * glpk.h, glpapi06.c
        The routine lpx_simplex was replaced by an equivalent routine
        glp_simplex. Also new API routine glp_init_smcp was added.

        * glpk.h, glpapi09.c
        The following advanced API routines were added:
        glp_bf_exists, glp_factorize, glp_bf_updated, glp_get_bfcp,
        glp_set_bfcp, glp_get_bhead, glp_get_row_bind, glp_get_col_bind,
        glp_ftran, glp_btran.

        * glpk.latex
        A new edition of the reference manual was included.

        * examples/dea.mod, examples/food.mod, examples/food2.mod
        Three examples in the MathProg language were added.
        Thanks to Sebastian Nowozin <nowozin@gmail.com>.

Sat May 26 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.17 (2:0:2) has been released

        * glpdmp.h, glpdmp.c
        Memory pool routines were replaced by a new version.

        * glpscs.h, glpscs.c
        Segmented string routines were replaced by a new version.

        * glplpx08.c, glplpx09.c
        Now the MIP problem may have no integer columns.

        * glpapi01.c
        The routines glp_set_mat_row, glp_set_mat_col, and glp_load_mat
        were modified to allow zero elements (which are not stored in
        the constraint matrix).

        * glpscf.h, glpscf.c
        Schur complement factorization routines were implemented.

        * glplpf.h, glplpf.c
        LP basis factorization routines based on LU-factorization and
        Schur complement were implemented.

        * glplpx02.c, glplpx03.c
        New control parameter LPX_K_BFTYPE was introduced to choose the
        basis factorization type used by the simplex method routines.

        * glpsol.c
        Three new command-line options were added to choose the basis
        factorization type used by the simplex method routines: --luf,
        --cbg, and --cgr.

        * glpk.latex
        A new edition of the reference manual was included.

Sat May 05 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.16 (1:0:1) has been released

        * glpk.h, glpapi.c, glplpx01.c, glplpx02.c
        Names of a number basic api routines were changed and now have
        the prefix 'glp_'. To keep backward compatibility these routines
        are also available via their old names prefixed with 'lpx_'.

        * glplpx19.c
        Three new api routines were added: glp_version, glp_term_hook,
        and glp_mem_usage.

        * glpk.latex, gmpl.texi
        A new edition of the reference manuals was included.

        * lpglpk40.c
        This example program is no longer supported and therefore was
        removed from the package.

Sun Feb 18 12:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.15 (0:0:0) has been released

        * configure.ac, Makefile.am
        Autotools specification files were changed to use GNU Libtool
        that allows building the static as well as shared GLPK library.
        Thanks to Rafael Laboissiere <rafael@debian.org>.

Mon Feb 05 08:00:00 2007 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.14 has been released
        Now GLPK conforms to ILP32, LLP64, and LP64 programming models
        (the latter seems to be the ultimate choice regarding 64-bit
        architectures). Note that GLPK itself is a 32-bit application,
        and the conformity only means that the package works correctly
        on all these arenae. Nevertheless, on 64-bit platforms it is
        possible to use more than 4GB of memory, if necessary.

        * Makefile
        Starting from this release only the header glpk.h is needed to
        be installed.

        * glplib01.c
        Two routines bigmul and bigdiv which performs multiplication
        and division of unsigned integers of arbitrary precision were
        added.

        * glplib02.c
        A set of 64-bit arithmetic routines were added.

        * glplib04.c
        Some low-level library routines were improved and renamed.

        * glpcfg.h
        The macro GLP_TM_SPEC were introduced to specify a version of
        the time routine depending on the host environment.

Mon Nov 13 12:00:00 2006 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.13 has been released

        * configure.in
        '-lm' bug was fixed.

        * glpbfx.h, glpbfx.c
        Basis factorization interface routines based on exact (bignum)
        arithmetic were implemented.

        * glpssx.h, glpssx1.c, glpssx2.c
        Simplex method routines based on exact (bignum) arithmetic were
        implemented.

        * glplpx6e.c
        The routine lpx_exact, which is an easy-to-use driver to the
        exact simplex method, was added.

        * glpsol.c
        Two command-line options were added: '--exact' and '--xcheck'.

Wed Nov 08 12:00:00 2006 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.12 has been released

        * glpcfg.h
        The package configuration file was added.

        * glplib2.c
        Alternative version of the routines umalloc, ucalloc, and ufree
        was provided. It does not limit the amount of allocated memory
        to INT_MAX bytes and therefore can be used on platforms where
        sizeof(void *) > sizeof(int). To enable this version one should
        define the preprocessor variable GLP_HUGE_MEM.

        * glprng.c
        The routine rng_create_rand was changed to initialize the
        generator using seed = 1, not 0, to conform ISO C requirements.

        * glpgmp.h, glpgmp.c
        A set of bignum arithmetic routines implementing operations on
        integers and rationals was added. These routines are compatible
        with the GNU MP library.

        NOTE: To attain a much better performance it is recommended to
        use, if possible, the original GNU MP library rather than the
        GLPK version, by defining the preprocessor variable GLP_USE_GMP.

        * glplux.h, glplux.c
        A tentative implementation of sparse LU-factorization based on
        exact (bignum) arithmetic was added.

        * glpssx.h, glpssx.c
        A tentative implementation of some simplex method routines based
        on exact (bignum) arithmetic was added.

        * glplpx6f.c
        A preliminary implementation of the routine lpx_exact_check was
        added. This routine checks the current basis for primal and dual
        feasibility using exact (bignum) arithmetic.

        * examples/glpsol.c
        The command-line option '--xcheck' was introduced to check the
        current basis for feasibility using exact (bignum) arithmetic.

Tue Jul 25 12:00:00 2006 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.11 has been released.

        * include/glpbfi.h, src/glpbfi.c
        Basis factorization interface routines were added.

        * include/glpluf.h, src/glpluf1.c
        Hypersparse solution routines were added.

        * include/glpinv.h, src/glpinv1.c
        Hypersparse solution routines (fake version) were added.

        * include/glpmpl.h, src/glpmpl.c
        Built-in functions card, length, and substr were implemented.
        Output redirection in the printf statement was implemented.

        * examples/graph.mod, examples/crypto.mod
        Two example models illustrating new features of the modeling
        language were included.

Thu May 11 12:00:00 2006 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.10 has been released.

        * src/glplpx8a.c
        A fragment was added to the routines lpx_read_mps and
        lpx_read_freemps to accept LI bound type (it is similar to LO,
        however, additionally marks the column as integer).

        * include/glpbfi.h, src/glpbfi.c
        The module glpbfi which implements the basis factorization
        interface (BFI) was added.

        * src/glplpx7a.c
        The routine lpx_cover_cut to generate mixed cover cuts was
        added.

        * src/glplpx7b.c
        The routine lpx_clique_cut to generate clique cuts and related
        routines to maintain the conflict graph were added.

        * include/glplpx.h, src/glplpx5.c
        The routine lpx_cpx_basis implementing Bixby's algorithm to
        construct an initial LP basis was added.

        * examples/glpsol.c
        Command-line option '--bib' was added which allows building
        an initial LP basis using Bixby's algorithm.
        Default command-line option '--mps' was changed to '--freemps'.

        * examples/cf12a.mod, examples/cf12b.mod
        Two examples in MathProg (curve fitting problem) were added.
        Thanks to Dr. Harley Mackenzie <hjm@hardsoftware.com>.

Tue Jan 17 12:00:00 2006 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.9 has been released.

        * glpipp.h, glpipp1.c, glpipp2.c
        A MIP presolver were implemented (currently incomplete). It is
        used internally in the routine lpx_intopt (see below).

        * glplpx6d.c, glplpx7a.c
        An advanced branch-and-bound solver (the routine lpx_intopt)
        were implemented.

        * glplpx6c.c
        The routine lpx_check_int to check MIP feasibility conditions
        was added.

        * glplpx8a.c
        The routine lpx_print_mip was changed to print MIP feasibility
        conditions.

        * glpmpl.h, glpmpl1.c, glpmpl3.c
        The built-in functions sin, cos, atan, and atan2 were added to
        the MathProg language.

        * doc/lang.*
        Some typos were fixed.
        Thanks to Minh Ha Duong <haduong@centre-cired.fr> (CIRED, CNRS).

Wed Jan 12 12:00:00 2005 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.8 has been released.

        * glpspx.h, glpspx1.c, glpspx2.c, glplpx6a.c
        Simplex method routines were changed due to a new format of the
        constraint matrix.

        * glpmat.h, glpmat.c
        Sparse matrix routines were re-implemented using storage-by-rows
        format.

        * glpipm.h, glpipm.c, glplpx6b.c
        Interior-point method routines were changed due to a new format
        of sparse matrices.

        * glpchol.h, glpchol.c
        Old version of Cholesky factorization routines being replaced by
        a new one (see glpmat.c) was removed from the package.

        * glplpx8c.c
        Minor bug was fixed in api routine lpx_read_cpxlp.

Mon Aug 23 12:00:00 2004 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.7 has been released.

        * glplpx.h, glplpx1.c
        New core API routines were added (but not documented yet):
        lpx_order_matrix, lpx_create_index, lpx_find_row, lpx_find_col,
        lpx_delete_index.

        * glplpx8a.c
        API routine lpx_read_mps was re-implemented, and two new API
        routines lpx_read_freemps and lpx_write_freemps were added to
        support free MPS format.

        * glplpx8c.c
        Two API routines lpx_read_cpxlp and lpx_write_cpxlp (formerly
        named lpx_read_lpt and lpx_write_lpt) were re-implemented.

        * glpmps.h, glpmps.c
        This module formerly used in lpx_read_mps was removed from the
        package.

        * glplpt.h, glplpt.c
        This module formerly used in lpx_read_lpt was removed from the
        package.

        * glpmip.h, glpmip1.h, glpmip2.h
        New MIP routines mip_best_node and mip_relative_gap were added
        due to suggestion of Brady Hunsaker <hunsaker@engr.pitt.edu>.

        * glpsol.c
        The following new command-options were added:
        --freemps  to read problem data in free MPS format
        --wfreemps to write problem data in free MPS format
        --cpxlp    to read problem data in CPLEX LP format
        --wcpxlp   to write problem data in CPLEX LP format
        --bas      to read LP basis from a text file in MPS format
        --wbas     to write LP basis to a text file in MPS format
        --mostf    to use "most fractional" branching heuristic
        --bestb    to use "best bound" backtracking heuristic

        * contrib/deli/*.*
        GLPK Delphi interface module was temporarily removed from the
        distribution due to licensing problems.

        * contrib/glpkmex/*.*
        GLPK Matlab interface module was temporarily removed from the
        distribution due to licensing problems.

        * contrib/jni/*.*
        GLPK Java interface module was temporarily removed from the
        distribution due to licensing problems.

Wed Aug 04 12:00:00 2004 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.6 has been released.

        * glpmpl.h, glpmpl1.c, glpmpl2.c, glpmpl3.c, glpmpl4.c
        Three new statements were implemented in the GNU MathProg
        language: solve, printf, and for. Also some bugs were fixed.

        * glplpx.h, glplpx8e.c
        Two API routines were added: lpx_read_prob and lpx_write_prob,
        which allow reading and writing problem data in GNU LP format.

        * glpsol.c
        Three new command-line options were added: --glp (to read
        problem data in GNU LP format), --wglp (to write problem data
        in GNU LP format), and --name (to change problem name).

        * glprng.h, glprng.c
        A portable pseudo-random number generator was implemented as a
        separate module.

        * glplib4.c
        The old implementation of a pseudo-random number generator was
        removed from the package.

        * doc/lang.*, doc/refman.*
        New edition of the GLPK documentation was included.

        * contrib/glpkmex/*.*
        A new version of GLPKMEX was included in the distribution. For
        more details see contrib/glpkmex/ChangeLog.

Mon Jul 19 12:00:00 2004 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.5 has been released.

        * glpmip.h, glpmip1.c, glpmip2.c, glplpx6c.c
        New implementation of the branch-and-bound method was added.
        It replaces the old implementation, which was removed from the
        package.

        * glpies.h, glpies1.c, glpies2.c, glpies3.c
        Modules used in the old implementation of the branch-and-bound
        method were removed from the package.

        * glplib2.c
        Now if the preprocessor variable GLPHUGEMEM is defined, other
        version of the routines umalloc, ucalloc, and ufree is used on
        compiling the package. This allows avoiding memory allocation
        problems on platforms where sizeof(void *) > sizeof(int), for
        example, where addresses are 64-bit while integers are 32-bit.
        The modification was made due to a bug report provided by Karel
        Zimmermann <kzimm@diamant.jouy.inra.fr> and Christophe Caron
        <caron@diamant.jouy.inra.fr>.

Sat Jan 17 12:00:00 2004 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.4 has been released.

        * glplpx.h, glplpx*.c
        All API routines were re-implemented using new data structures.
        Some new API routines were added and some existing API routines
        became obsolete as shown below:

        Obsolete API routine   Equivalent new API routine
        lpx_check_name         (no more supported)
        lpx_set_obj_c0         lpx_set_obj_coef
        lpx_set_row_coef       (no more supported)
        lpx_set_col_coef       lpx_set_obj_coef
        lpx_load_mat           (no more supported)
        lpx_load_mat3          lpx_load_matrix
        lpx_unmark_all         (no more supported)
        lpx_mark_row           (no more supported)
        lpx_mark_col           (no more supported)
        lpx_clear_mat          (no more supported)
        lpx_del_items          lpx_del_rows, lpx_del_cols
        lpx_get_row_bnds       lpx_get_row_type, lpx_get_row_lb,
                               lpx_get_row_ub
        lpx_get_col_bnds       lpx_get_col_type, lpx_get_col_lb,
                               lpx_get_col_ub
        lpx_get_obj_c0         lpx_get_obj_coef
        lpx_get_row_coef       (no more supported)
        lpx_get_col_coef       lpx_get_obj_coef
        lpx_get_row_mark       (no more supported)
        lpx_get_col_mark       (no more supported)
        lpx_get_row_info       lpx_get_row_stat, lpx_get_row_prim,
                               lpx_get_row_dual
        lpx_get_col_info       lpx_get_col_stat, lpx_get_col_prim,
                               lpx_get_col_dual
        lpx_get_ips_stat       lpx_ipt_status
        lpx_get_ips_row        lpx_ipt_row_prim, lpx_ipt_row_dual
        lpx_get_ips_col        lpx_ipt_col_prim, lpx_ipt_col_dual
        lpx_get_ips_obj        lpx_ipt_obj_val
        lpx_get_mip_stat       lpx_mip_status
        lpx_get_mip_row        lpx_mip_row_val
        lpx_get_mip_col        lpx_mip_col_val
        lpx_get_mip_obj        lpx_mip_obj_val

        Obsolete API routines were kept for backward compatibility,
        however, they will be removed in the future.

        * doc/refman.*
        New edition of the GLPK reference manual containing description
        of all new API routines was included.

        * contrib/glpkmex/*.*
        GLPKMEX, a Matlab MEX interface to GLPK package, contributed by
        Nicolo Giorgetti <giorgetti@dii.unisi.it> was included.

        * doc/GLPK_FAQ.txt
        GLPK FAQ contributed by Harley Mackenzie <hjm@bigpond.com> was
        included.

Fri Dec 12 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.3 has been released.

        * configure.in
        The bug, due to which the standard math library is not linked on
        some platforms, was fixed.

        * glpmpl3.c
        The bug (0 ** y) was fixed in the routine fp_power.

        * glpmpl.h, glpmpl1.c, glpmpl3.c
        Some new built-in functions (round, trunc, Irand224, Uniform01,
        Uniform, Normal01, Normal) were added to the MathProg language.

        * glpmpl1.c
        The MathProg syntax was changed to allow writing 'subj to'.

        * glplpx.h, glplpx1.c, glplpx2.c
        The new api routine lpx_get_ray_info was added.

        * glplpx8a.c
        The api routine lpx_print_sol was changed to print the number of
        non-basic variable, which causes primal unboundness.

        * glpmps.c
        The code was changed to avoid errors on compiling the package on
        Mac OS X. Thanks to Andre Girard <andre@inrs-emt.uquebec.ca> for
        the bug report.

        * doc/lang.*, doc/refman.*
        Several typos were fixed and some new material was added in the
        glpk documentation.

Fri Nov 14 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.2 has been released.

        * glpiet.h, glpiet.c, glpios.h, glpios1.c, glpios2.c, glpios3.c
        A preliminary implementation of the Integer Optimization Suite
        (IOS) was included in the package. Eventually IOS will replace
        the Implicit Enumeration Suite (IES).

        * glplpx.h, glplpx6d.c
        A dummy version of the integer optimization routine lpx_intopt
        was included in the package. Later this routine will replace the
        routine lpx_integer.

        * examples/glpsol.c
        A new command-line option --int-opt was added to the solver to
        call lpx_intopt rather than lpx_integer.

        * glpbcs.h, glpbcs1.c, glpbcs2.c
        Being replaced by IOS routines (see above) the Branch-and-Cut
        Framework (BCS) routines were removed from the package.

        * examples/tspsol.c
        Stand-alone Symmetric TSP solver was completely re-programmed
        using IOS routines.

        * glplib.h, glplib2.c, glplib4.c
        The random-number generator was implemented. It is based on the
        module GB_FLIB from the Stanford GraphBase originally developed
        by Donald Knuth.

        * glphbsm.c, glplpx8a.c, glpmps.c
        All calls to fopen/fclose were replaced by corresponding calls
        to ufopen/ufclose due to bug reports provided by Morten Welinder
        <terra@gnu.org> and <jpark@sfwmd.gov>.

        * glpmps.c
        The code was made re-entrant.

        * glplpx8b.c
        API routine lpx_print_sens_bnds for bounds sensitivity analysis
        contributed by Brady Hunsaker <hunsaker@engr.pitt.edu> was added
        to the package. This feature is also available in glpsol via the
        command-line option --bounds.

        * contrib/jni/*.*
        New version of GLPK JNI (Java Native Interface) contributed by
        Chris Rosebrugh <cpr@pobox.com> was added to the package.

        * contrib/deli/*.*
        GLPK DELI (Delphi Interface) contributed by Ivo van Baren
        <i.van.baren@freeler.nl> was added to the package.

        * glplpx3.c
        Default method to scale the problem was changed to equilibration
        scaling (lp->scale = 1 in lpx_reset_parms).

        * glplpx6a.c
        Two minor (non-critical) typos were fixed due to report provided
        by Andrew Hamilton-Wright <andrewhw@ieee.org>.

        * glplpp2.c
        An untested case (line 941) had been tested due to bug report
        provided by Jiri Spitz <jiri.spitz@telecom.cz>.

        * w32bc5.mak, w32vc6.mak, w32vc6d.mak, d32dmc.mak
        Several makefiles were added to allow building GLPK library for
        some non-GNU 32-bit platforms.

Sat Aug 23 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.1 has been released.

        * glpmpl1.c, glpmpl3.c
        Some bugs were fixed in the MathProg translator due to the bug
        reports provided by Giles Thompson <gwpt1@cus.cam.ac.uk>:
        conditional set expressions were incorrectly parsed;
        dimen attribute was not set by default when a set was used
        recursively in its own declaration;
        logical expressions ... in if ... then ... else ... did not
        work;
        displaying set expressions did not free memory allocated for
        temporary results.

        * glpmpl3.c (reduce_terms)
        Implementation of summation of linear forms over domain was
        improved to reduce complexity of that operation from O(n*n) to
        O(n*log n). The improvement was made due to a report provided
        by Sebastien de Menten <sdementen@hotmail.com>.

        * glplpx6a.c (line 1056), glpmip1.c (line 641)
        Two minor bugs were fixed due to the bug report provided by
        Kendall Demaree <kendal.demaree@verizon.net>.

        * glplpx.h, glplpx6a.c
        The method of one artificial variable implemented in the routine
        lpx_prim_art and used on the phase I in the glpk simplex solver
        has a serious defect: for some lp instances it erroneously
        reports that the problem has no primal feasible solution. This
        error appears when the column of the artificial variable, which
        enters the basis to make it primal feasible, has large
        constraint coefficients, that leads to small reduced costs of
        non-basic variables and premature termination of the search,
        i.e. to wrong conclusion that the problem has no primal feasible
        solution. To avoid this defect the routine lpx_prim_feas was
        included. It implements the method of implicit artifical
        variables (based on minimization of the sum of infeasibilities),
        which is a bit slower but much more robust. The routine
        lpx_prim_feas having the same functionality now is used instead
        the routine lpx_prim_art.

        * glpinv.h, glpinv.c
        The test used in the routine inv_update to detect low accuracy
        after updating LU-factorization of the basis matrix was replaced
        by a new, more robust test.

        * glplpx6c.c
        Selecting an active node to be solved next in the routine
        btrack_bestp was changed. Now, if any integer feasible solution
        has not been found yet, the routine chooses an active node which
        has the minimal sum of integer infeasibilities.

        * glpmip.h, glpmip1.c
        The additional flag int_obj was included in the structure
        MIPTREE used by the branch-and-bound. This flag is set in the
        routine mip_create_tree and used in the routine is_better. It
        means that the objective is integral, i.e. depends only on
        integer variables with integer objective coefficients. The test
        used in the routine check_integrality was also replaced by a
        new, more reasonable one.

        * glplpx1.c
        A minor bug was fixed in the routine lpx_check_name.

        * glpmpl.h, glpmpl4.c, glplpx8d.c
        The flag skip_data was added to the parameter list of the
        routine mpl_read_model. If this flag is set, the data section
        in the model file is ignored. Corresponding change was made in
        the routine lpx_read_model. Now, if both model and data files
        are specified, the data section in the model file is ignored.

        * glplpx8c.c
        A minor bug (wrong format used for writing free columns) in the
        routine lpx_write_lpt was fixed due to the bug report provided
        by Bernhard Schmidt <schmidt@math.uni-augsburg.de>

        * sample/glpsol.c
        The command-line parameter --tmlim, which allows limiting the
        solution time, was added.

        * doc/lang.*, doc/refman.*
        New edition of the GLPK documentation was included.

        * java-binding/*.*
        New version of the GLPK JNI (Java Native Interface) package was
        included in the distribution.

        * sample/lpglpk40.c
        A non-trivial example was added. It allows using GLPK as a base
        LP solver for Concorde, a program for solving Traveling Salesman
        Problem (TSP). For details see comments in lpglpk40.c.

        * sample/*.mod
        Some examples of LP and MIP models written in GNU MathProg were
        added.

Tue May 06 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 4.0 has been released.

        * glpmpl.h, glpmpl1.c, glpmpl2.c, glpmpl3.c, glpmpl4.c
        The model translator for the GNU MathProg modeling language was
        implemented and included in the package.

        * glplpx.h, glplpx8d.c
        The api routine lpx_read_model, which is an interface to the
        MathProg translator, was included in the package.

        * glplpx.h, glplpx8a.c
        The api routine lpx_print_prob for writing LP/MIP problem data
        in plain text format was included in the package.

        * sample/glpsol.c
        New version of the GLPK stand-alone LP/MIP solver that supports
        the GNU MathProg modeling language was implemented.

        * doc/lang.latex, doc/lang.dvi, doc/lang.ps
        The document "GLPK: Modeling Language GNU MathProg" was included
        in the package.

        * doc/refman.latex, doc/refman.dvi, doc/refman.ps
        New edition of the GLPK Reference Manual was included in the
        package.

        * glplpx8c.c
        A bug in the api routine lpx_write_lpt was fixed. Due to that
        bug an addressing error occured in the routine if the objective
        function has the non-zero constant term.

        * glplan.h, glplan1.c, glplan2.c, glplan3.c, glplan4.c,
        * glplan5.c, glplan6.c, glplan7.c, glplan8.c, glplpx8b.c
        All modules of the translator for the GLPK/L modeling language
        were removed from the package, because GLPK/L being completely
        superseded by GNU MathProg is no more supported.

Tue Mar 25 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.3 has been released.

        * glplpp.h, glplpp1.c, glplpp2.c
        An implementation of the built-in LP presolver was added to the
        package.

        * glplpx.h
        The flag presol was added to the structure LPX. This flag tells
        the lpx_simplex whether the built-in LP presolver should be used
        or not. By default this flag is off. Also three macros (namely
        LPX_E_NOPFS, LPX_E_NODFS, and LPX_K_PRESOL) that concern using
        the LP presolver were introduced.

        * glplpx3.c, glplpx6a.c
        These modules was changed to use the built-in LP presolver.

        * sample/glpsol.c
        Command line options --presol and --nopresol that concern using
        the LP presolver were added to the stand-alone LP/MIP solver.

        * glplan1.c
        This module was changed to allow declaring sets like A[1:10] in
        the models written in the GLPK/L modeling language.

        * doc/refman.latex, doc/lang.latex
        New editions of the documents "GLPK User's Guide" and "GLPK/L
        Modeling Language" were included in the distribution.

        * java-binding/*.*
        The package GLPK JNI (Java Native Interface) implementing Java
        binding for GLPK was included in the distribution. This package
        was developed and programmed by Yuri Victorovich <yuri@gjt.org>.

Tue Feb 18 12:00:00 2003 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.2.4 has been released.

        * glplpx6b.c
        The code was changed to allow auxiliary variables have non-zero
        objective coefficients.

        Also a minor bug was fixed (the constant term was not considered
        on displaying the objective function value).

        * sample/glpsol.c
        The code was changed to fix a bug (the command-line option 'bfs'
        was not recognized). The bug was fixed due to report provided by
        Olivier <odwl@skynet.be>.

        * glplpt.c
        The code was changed to fix a bug (binary variables were treated
        erroneously as integer ones).

        * glplpx6b.c
        The code was changed to fix a bug (variables that have no lower
        bounds were incorrectly processed on converting to the standard
        formulation). The bug was fixed due to report kindly provided by
        Kjell Eikland <kjell.eikland@broadpark.no>.

Mon Nov 11 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.2.3 has been released.

        * glpmip.h, glpmip1.c
        A preliminary implementation of the branch-and-bound driver
        based on the implicit enumeration suite (glpies) was added to
        the package. This module is not documented yet.

        * glplpx6c.c
        A new implementation of the api routine lpx_integer which now
        is based on the b&b driver (see glpmip above) was included in
        the package. This new implementation has exactly the same
        functionality as the old version and therefore all changes are
        transparent to the api user.

        * glpbbm.h, glpbbm.c
        * glprsm.h, glprsm1.c, glprsm2.c
        * glplp.h, glplp.c
        These modules were removed from the package, because they were
        used only in the old version of the routine lpx_integer, which
        was replaced by the new version (see glplpx6c above).

        * glplpx.h, glplpx6a.c
        The api routine lpx_check_kkt was included in the package and
        its description was added in the reference manual. This routine
        allows checking Karush-Kuhn-Tucker optimality conditions for an
        LP solution.

        * glplpx.h, glplpx8a.c
        Now the api routine lpx_print_sol also prints information about
        "solution quality" obtained via the api routine lpx_check_kkt.

        * glplpx.h, glplpx8a.c
        New api routines lpx_read_bas and lpx_write_bas were included
        in the package and documented. The routine lpx_write_bas allows
        writing a current basis from an LP object to a text file in the
        MPS format. The routine lpx_read_bas allows reading a basis
        prepared in the MPS format from a text file into an LP object.

        * glplpt.c
        The parsing routine which reads LP problem data prepared in the
        CPLEX LP format was modified to allow specifying lower bounds
        of variables also in the form 'variable >= lower bound' (in the
        bounds section). This modification was made due to a notice
        provided by Ivan Luzzi <iluzzi@libero.it>.

        * glplpx.h, glplpx8c.c
        The api routine lpx_write_lpt which allows writing LP problem
        data from an LP object to a text file using the CPLEX LP format
        was included in the package and documented.

        * glplpx.h, glplpx3.c
        The control parameter LPX_K_LPTORIG that affects the behavior
        of the api routine lpx_write_lpt was introduced.

        * glplan6.c
        The semantics of the language GLPK/L was changed to allow
        selection in case when not all mute letters of a predicate (the
        operand that follows the keyword 'where') are presented in a
        parameter (the operand that precedes the keyword 'where'), i.e.
        to allow writing something like this:
            y[j] := sum(i, x[i] where p[i,j]);
        The paragraph "Selection" in the langauge description (page 25)
        was also correspondingly changed. This change of the language
        semantics was undertaken due to a notice provided by Peter Lee
        <plee@kinggee.com.au>.

        * sample/hwd.lpm
        A nice example of LP model written in GLPK/L and contributed by
        Peter Lee <plee@kinggee.com.au> was included in the package.

        * glplpx6b.c
        The api routine lpx_interior was modified: a) to compute dual
        values for all structural as well as auxiliary variables; b) to
        allow specifying non-zero objective coefficients at auxiliary
        variables.

        * sample/glpsol.c
        Three new command-line options were added to the solver, which
        are: --plain, --orig, and --wrlpt.

Mon Oct 14 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.2.2 has been released.

        * glplpt.h, glplpt.c
        A module that reads LP/MIP problem data in CPLEX LP format was
        implemented.

        * glplpx8c.c
        An api routine lpx_read_lpt that reads LP/MIP problem data in
        CPLEX LP format was implemented.

        * sample/glpsol.c, sample/plan.lpt
        A new command-line option '--lpt' that allows reading LP/MIP
        problem data in CPLEX LP format was added to the solver.

        * doc/refman.latex, doc/refman.dvi, doc/refman.ps
        A new edition of the Reference Manual was included.

        * source/*.c
        Casting to (unsigned char) was added in some calls to the
        classification functions (isalpha, etc.). The bug was fixed due
        to report provided by Morten Welinder <terra@diku.dk>.

        * glplpx8a.c
        The local routine mps_numb used in the routine lpx_write_mps
        was modified to correctly format floating-point numbers that
        have two digits in the decimal exponent. The bug was fixed due
        to report provided by Vlahos Kiriakos <Kiriakos.Vlahos@gs.com>.

        * glplan.h, glplan1.c, ..., glplan8.c
        Several serious bugs were fixed in the language processor due
        to reports provided by <NORBERT.PIOTROWSKI@LHSYSTEMS.COM>:
        (a) a static search tree used to find sparse array elements was
        sometimes overwritten that caused the message 'assertion failed'
        to appear; the bug was fixed by creating separate search trees
        in parsing routines; (b) a variable declared using the
        predicate-controlled variable declaration statement had wrong
        order of domain sets, because the variable array was built as
        a copy of the predicate array; the bug was fixed by using the
        internal routine transpose that coordinates mute letters (and
        therefore domain sets) on copying sparse arrays; (c) sometimes
        assignment statements like x[#a,#b,#c] := ... was incorrectly
        processed; the bug was fixed by including an appropriate check
        into the internal routine assign_stmt.

        * glp_simplex.c
        An additional check to see if all lower bounds are not greater
        than corresponding upper bounds was included in the routine to
        prevent wrong results to appear. Such incorrectness sometimes
        was not detected, namely, when variables with such bounds were
        non-basic and never entered the basis.

        * glpspx1.c
        Maximal number of simplex iterations before reinversion was
        decreased from 100 to 50. This allowed to improve accuracy and,
        that is more important, to reduce the solution time for many
        serial lp problems approximately 1.5--2 times.

        * glpspx2.c
        A check to see if all elements in the column chosen to enter
        the basis are close to zero in the routine spx_prim_chuzr was
        temporarily removed because this check gave wrong conclusion in
        case when the corresponding non-basic variable had zero column
        in the constraint matrix. An analogous check to see if all
        elements in the row chosen to leave the basis are close to zero
        in the routine spx_dual_chuzc was also temporarily removed on
        the same reason. The bug was fixed due to reports provided by
        Flavio Keidi Miyazawa <fkm@ic.unicamp.br> and Vlahos Kiriakos
        <Kiriakos.Vlahos@gs.com>.

Mon Aug 12 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.2.1 has been released.

        * glpbcs.h, glpbcs1.c, glpbcs2.c
        * glpies.h, glpies1.c, glpies2.c, glpies3.c
        A preliminary implementation of the branch-and-cut framework
        was included in the package.

        * doc/brcut.txt
        The document "GLPK: A Preliminary Implementation of the
        Branch-And-Cut Framework" was included in the distribution.

        * sample/tspsol.c
        An illustrative program for solving symmetric TSP based on the
        branch-and-cut method was included in the package.

        * glpdmp.h, glpdmp.c
        A new, re-enterable version of routines for managing dynamic
        memory pools was included in the package.

        * glpavl.h, glpavl.c
        A new, re-enterable version of routines for managing AVL search
        trees was included in the package.

        * glplib.h, glplib2.c
        Two new low-level routines ufopen and ufclose were included in
        the package.

        * glplpx.h, glplpx7.c
        The following new api routines were added: lpx_eval_activity,
        lpx_eval_red_cost, lpx_reduce_form, lpx_mixed_gomory.

        * glptsp.h, glptsp.c
        A module for reading TSP data using TSPLIB format was included
        in the package.

Mon Jul 15 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.2 has been released.

        * glplpx.h, glplpx1.c, glplpx2.c
        The identifier 'class' (used as a member name in the structure
        LPX and as an argument name in the routine lpx_set_class) was
        changed to 'clss' in order to avoid conflicts with C++ reserved
        words.

        * glpk.h, glplpx.h, glplpx1.c, glplpx2.c, glplpx6a.c,
        * glplpx6b.c, glplpx6c.c, glplpx7.c, glplpx8.c
        The following new api routines were added: lpx_set_obj_name,
        lpx_get_obj_name, lpx_get_row_mark, lpx_get_col_mark,
        lpx_transform_row, lpx_transform_col, lpx_prim_ratio_test,
        lpx_dual_ratio_test, lpx_interior, lpx_get_ips_stat,
        lpx_get_ips_row, lpx_get_ips_col, lpx_get_ips_obj, lpx_read_lpm,
        lpx_write_mps, lpx_print_ips.

        * glpsol.c
        The solver was completely re-programmed using new api routines.

        * lang.latex, lang.dvi, lang.ps
        New edition of the document "GLPK: Modeling Language GLPK/L"
        was included in the distribution.

        * refman.latex, refman.dvi, refman.ps
        New edition of the document "GLPK: Reference Manual" (which
        contains descriptions of all new api routines) was included in
        the distribution.

        * glpapi.h, glpapi1.c, glpapi2.c, glpapi3.c, glpapi4.c
        These files (which contain old api routines) were removed from
        the package.

        * glpipm1.c, glpipm2.c
        The file glpipm1.c was renamed to glpipm.c. The file glpipm2.c
        was used only by old api routines and therefore was removed from
        the package.

        * language.texinfo
        Old version of the document "GLPK: Modeling Language GLPK/L" was
        removed from the distribution.

Mon May 27 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.1 has been released.

        * glplpx.h, glplpx1.c, glplpx2.c, glplpx3.c, glplpx4.c,
        * glplpx5.c, glplpx6.c, glplpx7.c, glplpx8.c
        A preliminary implementation of new API routines was completed.

        * refman.latex, refman.dvi, refman.ps
        A draft edition of the document "GLPK Reference Manual", which
        describes new API routines, was included.

        * glplib3.c
        A bug in measuring long time intervals was fixed up.

        * glprsm3.c
        This module contains some obsolete routines not longer used and
        therefore it was removed from the package (into the subdirectory
        'oldsrc').

        * glprsm.h
        Some declarations related to the module 'glprsm3.c' (see above)
        were removed.

        * guide.texinfo
        The document "GLPK User's Guide" describing old API routines was
        removed from the package (into the subdirectory 'oldsrc').

        * newapi.txt
        The document "New GLPK API Routines" was removed at all, because
        it is superseded by the new reference manual (see above).

Mon May 13 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.8 has been released.

        * glplpx.h, glplpx1.c, glplpx2.c, glplpx3.c, glplpx4.c,
        * glplpx5.c, glplpx6.c, glplpx7.c
        A preliminary (currently incomplete) implementation of new api
        routines was included.

        * sample/newsamp.c
        A sample program for the new api routines was included.

        * newapi.txt
        A draft of the document "New GLPK API Routines" was included.

        * glpapi2.c, glpapi5.c, glpapi6.c
        These modules (which contain the api routines glp_call_rsm1,
        glp_simplex1, glp_pivot_in, glp_pivot_out) were removed from the
        package (to the subdirectory 'oldsrc') since these routines are
        functionally superseded by the new api routines.

        * glpk.h, glpapi2.c, glpapi3.c, glpapi4.c
        The api routines glp_simplex2, glp_call_ipm1, glp_call_bbm1 were
        renamed to glp_simplex, glp_interior, glp_integer, respectively.

        * sample/glpsol.c
        Some command-line options (which got obsolete due to the recent
        changes in api) were excluded.

        * doc/guide.texinfo
        New edition of the document "GLPK User's Guide" was included in
        the distribution to reflect the changes in some api routines.

        * doc/libref.texinfo
        This document was removed from the package (to the subdirectory
        'oldsrc') since it describes the library routines, most of which
        got obsolete and no longer used.

        * Makefile.in
        A minor bug was fixed up due to bug report from Hans Schwengeler
        <Hans.Schwengeler@unibas.ch>.

Mon Apr 22 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.7 has been released.

        * glpduff.h, glpduff.c, glpspx.h, glpspx1.c, glpspx2.c,
        * glpapi7.c
        These modules were replaced by a new implementation of the
        simplex method and therefore they were removed from the package
        (however they still can be found in the subdirectory 'oldsrc').

        * glprsm1.c
        The routine crash_aa was replaced by a new implementation and
        therefore it was removed from the file 'glprsm1.c'.

        * glplpx.h, glplpx.c, glpspx.h, glpspx1.c, glpspx2.c, glpspx3.c,
        * glpspx4.c, glpapi7.c
        New (currently incomplete) implementation of the simplex method
        components was included in the package.

Thu Mar 28 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.6 has been released.

        * glpluf.h, glpluf.c, glpinv.h, glpinv.c
        New version of LU-factorization and basis maintenance routines
        (based on Forrest-Tomlin updating technique) was implemented.

        * glpeta.h, glpeta.c, glpfhv.h, glpfhv.c, glpgel.h, glpgel.c,
        * glppfi.h, glppfi.c, glprfi.h, glprfi.c
        These routines implement some other forms of the basis matrix.
        Now they became obsolete being functionally superseded by the
        new version of basis maintenance routines (see above) and were
        removed from the package (however they still can be found in the
        subdirectory 'oldsrc').

        * glpbbm.c, glprsm.h, glprsm1.h, glprsm2.h, glpspx.h, glpspx2.c,
        * glprsm2.c, glpsol.c
        Necessary changes were made in order to use the new version of
        basis maintenance routines.

Tue Jan 29 12:00:00 2002 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.5 has been released.
        Structure of the package was re-organized in order to simplify
        its maintenance.

        * doc/guide.texinfo
        New edition of the document "GLPK User's Guide" was included in
        the distribution. Now the document includes descriptions of some
        additional API routines recently added to the package.

        * doc/newapi.txt
        The document "Additional GLPK API Routines" was removed from the
        distribution, because the corresponding material was included in
        the user's guide (see above).

Mon Dec 10 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.4 has been released.

        * glpspx.h, glpspx1.c, glpspx2.c, glpapi/glp_simplex2.h
        A new, more efficient version of the two-phase primal simplex
        method was implemented (advanced initial basis, projected
        steepest edge, recursive computations of solution components).

        * glpapi/glp_call_bbm1.c
        Now LP relaxation can be solved either using rsm1_driver(), or
        using glp_simplex2(). The choice is controlled by the parameter
        'meth' (a member of struct bbm1).

        * sample/glpsol.c
        The new implementation of the simplex method is now used by
        default. The old version is available via --old-sim option.

        * glpmat/gm_scaling.c
        Now this routine displays only two lines: an initial "quality"
        and a final "quality".

        * glplp/prepro_lp.c
        Identifiers 'fmin' and 'fmax' renamed to 'f_min' and 'f_max' in
        order to avoid conflict with <math.h>. The bug was fixed due to
        report provided by Sami Farin <sfarin@ratol.fi>.

Wed Oct 03 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.3 has been released.

        * glprsm/harris_row.c, glprsm/harris_col.c
        The relative tolerance used on the first pass of the two-pass
        ratio test was replaced by the absolute tolerance.

        * glprsm/rsm_primal.c, glprsm/rsm_feas.c, glprsm/rsm_dual.c
        The absolute tolerance passed to the two-pass ratio test routine
        was decaresed (for both primal and dual simplex).

        These changes were made in order to improve numerical stability
        of the simplex method.

        * glprsm/glp_call_rsm1.c, glprsm/glp_call_bbm1.c,
        * glprsm/glp_simplex1, glprsm/glp_pivoting.c
        Default form of the inverse was changed from RFI to AFI.

Mon Sep 24 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.2 has been released.

        * glpfhv.h, glpfhv.c
        New version of the basis maintaining routines was implemented.
        These routines, which are based on so called FHV-factorization
        (a variety of LU-factorization) and Gustavson's data structures,
        perform the main operations on the basis matrix faster at the
        expense of some worsening numerical accuracy.

        * glprsm.h, glprsm/afi.c
        The routines, which implement AFI (Advanced Form of the
        Inverse) based on FHV-factorization, were added to the package.
        This new form is available via the parameter form = 3 (on API
        level) or via the option --afi (in GLPSOL solver).

        * EFI was renamed to PFI
        In order to correct terminology the acronym EFI (Elimination
        Form of the Inverse) was replaced by PFI (Product Form of the
        Inverse) everywhere in the source code and the documentation.

        * glpset/umalloc.c, glpset/ucalloc.c
        * glpset/get_atom.c, glpset/get_atomv.c
        These memory management routines were changed in order *not* to
        clear allocated memory blocks by binary zeros.

Wed Aug 01 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0.1 has been released.

        * glpapi/old_api.c, glplp/extract_lp.c, store_lpsol.c
        Old API routines were deleted from the package.

        * include/glpk.h, include/glpapi.h, include/glplp.h
        Specifications of old API routines and data structures were
        removed from the headers.

        * sample/glpsol.c
        New version of the stand-alone solver GLPSOL that now uses new
        API routines was implemented.

        * glpapi/glp_set_row_fctr.c, glpapi/glp_set_col_fctr.c,
        * glpapi/glp_get_row_fctr.c, glpapi/glp_get_col_fctr.c,
        * glpapi/glp_scale_prob.c
        Scaling routines were added.

        * glpapi/glp_write_mps.c
        The routine for writing problem data in MPS format was added.

        * glpapi/glp_simplex1.c
        Comprehensive driver to the simplex method was added.

        * glpapi/glp_pivoting.c
        The routines glp_pivot_in() and glp_pivot_out() intended for
        basis maintaining were added.

        * glprsm/create_rsm.c, glprsm/delete_rsm.c, glprsm/scale_rsm.c,
        * glprsm/build_basis.c
        Additional low level routines related to the simplex method
        were added.

        * glpk.h, glpapi.h, glprsm.h
        Additional specifications for new routines and data structures
        were added.

        * sample/lpglpk30.c
        A non-trivial example was added. It allows using GLPK as a base
        LP solver for Concorde, a program for solving Traveling Salesman
        Problem (TSP). For details see comments in 'lpglpk30.c'.

        * doc/newapi.txt
        The document "Additional GLPK API Routines" that describes some
        new API routines was included.

Thu Jul 19 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 3.0 has been released.

        Now GLPK is provided with new API, which is intended for using
        the package in more complex algorithmic schemes.

        * glpapi/old_api.c
        All routines related to old API were gathered in one file named
        'old_api.c'.

        * glpapi/*.c
        These routines that implement new API were added to the package.

        * include/glpk.h, include/glpapi.h
        Specifications of new API routines and data structures were
        added to these headers. Specifications of old API routines and
        data structures were locked by #ifdef GLP_OLD_API directive.

        * doc/guide.texinfo
        New edition of the document "GLPK User's Guide" that correspond
        to new API was included.

Thu Jun 14 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.4.1 has been released.

        * doc/glpk_ml.texinfo
        The new document "Modeling Language GLPK/L" was included.

        * doc/glpk_ug.texinfo
        New edition of the document "GLPK User's Guide" was included.

        * doc/language.txt
        The preliminary document "GLPK/L Modeling Language: A Brief
        description" was removed from the distribution, because it has
        been replaced by the new document "Modeling Language GLPK/L".

        * glplang/l_spar.c
        The routine comparison() was re-programmed in order to
        implement the relation operation as specified in the language
        description.

        * glpmip.h, glpmip/*.c
        The partition 'glpmip' was renamed to 'glpbbm'.

Thu May 10 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.4 has been released.

        Now GLPK includes an implementation of a preliminary version of
        the GLPK/L modeling language.

        * glplang.h, glplang/*.c
        The header 'glplang.h' and a set of routines that implements
        the GLPK/L language processor (the partition 'glplang') were
        added to the package.

        * doc/language.txt
        The document "GLPK/L Modeling Language: A Brief Description
        (Supplement to GLPK User's Guide)" in plain text format was
        included in the package (see the file 'language.txt' in the
        subdirectory 'doc' of the distribution).

        * ex/model1.lpm, ex/model2.lpm
        Two examples of model descriptions written in GLPK/L were added
        to the package.

        * sample/glpsol.c
        This program was modified in order: a) to allow processing
        model description written in GLPK/L; b) to allow solving pure
        LP problem using the interior point method.

        * sample/glpipm.c
        This program was removed from the package, because its function
        was passed to the GLPSOL solver.

        * Makefile.in
        This file was changed in order to install the GLPSOL solver
        executable.

Mon Apr 09 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.3 has been released.

        * glpmip.h, glpmip/*.c
        These routines (that implement the branch-and-bound method) were
        re-programmed in order to improve robustness of implementation.
        In particular, heuristic routines were carried out from the main
        driver routine.

        Additional GLPK API routines were documented.

        New edition of the document "GLPK User's Guide" was included in
        the package.

        The preliminary document "Mixed Integer Programming Using GLPK
        Version 2.2 (Supplement to GLPK User's Guide)" was removed from
        the package, because this material was included in GLPK User's
        Guide.

Thu Mar 15 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.2 has been released.

        Now GLPK includes a tentative implementation of the
        branch-and-bound procedure based on the dual simplex method for
        mixed integer linear programming (MIP).

        The preliminary document "Mixed Integer Programming Using GLPK
        Version 2.2 (Supplement to GLPK User's Guide)" was included into
        the package in plain text format (see the file 'mip.txt' in the
        subdirectory 'doc' of the distribution).

        * glpmip.h, glpmip/*.c, glpapi/glp_integer.c
        These routines (that implement the branch-and-bound method) were
        added to the package.

        * sample/glpsol.c
        This program was modified in order to allow solving LP and MIP
        problems.

        * glprsm/rsm_primal.c, glprsm/rsm_dual.c, glprsm/rsm_feas.c,
        * glprsm/rsm1_driver.c
        These routines (which are drivers to basic components of the
        revised simplex method) were added to the package.

Mon Feb 19 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.1 has been released.

        * glprsm.h, glprsm/*.c
        These routines (that implement components of the revised simplex
        method) were re-programmed and documented.

        The document "GLPK Implementation of the Revised Simplex Method"
        was included into the package.

Thu Jan 25 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 2.0 has been released.

        Now GLPK includes a tentative implementation of the primal-dual
        interior point method for large-scale linear programming (for
        more details see the file `NEWS' in the distribution). A number
        of routines related to the interior point method were added to
        the package.

        * insist.c
        The routine `insist' and the macro of the same name were
        introduced into the package in order to replace the standard
        macro `assert'. Some routines require the expression specified
        in the `assert' macro to be evaluated, but compiling the package
        with NDEBUG option prevents from that. This bug was fixed due to
        bug report provided by Peter A. Huegler <phuegler@bsco.com>.

        * Makefile.in
        Minor bug was fixed due to a patch provided by Alexandre Oliva
        <oliva@lsd.ic.unicamp.br>.

Wed Jan 10 12:00:00 2001 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 1.1.2 has been released.

        * umalloc.c, ufree.c, create_pool.c, get_atom.c, get_atomv.c
        These routines were changed in order to fix a bug due to
        report provided by Andrew Hood <ajhood@fl.net.au>. Because of
        this bug data alignment error occured on the Sparc computer.

Tue Dec 14 12:00:00 2000 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 1.1.1 has been released.

        Minor bug was fixed in `Makefile.in'.

        GLPK Library Reference was included.

Mon Nov 27 12:00:00 2000 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 1.1 has been released.

        Minor changes were made in order to co-ordinate GLPK routines
        and their descriptions.

        GLPK User's Guide was included.

Fri Oct 20 12:00:00 2000 Andrew Makhorin <mao@mai2.rcnet.ru>

        * GLPK 1.0 has been released.
