diff --git a/Documentation/Makefile b/Documentation/Makefile
index 94b9457..043d7da 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
 	filesystems/configfs/ ia64/ networking/ \
-	pcmcia/ spi/ video4linux/ vm/ watchdog/src/
+	pcmcia/ spi/ vm/ watchdog/src/
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 71c602d..ab8689b 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -502,6 +502,18 @@ more details, with real examples.
 	gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used.
 	Note: cc-option-align uses KBUILD_CFLAGS for $(CC) options
 
+    cc-disable-warning
+	cc-disable-warning checks if gcc supports a given warning and returns
+	the commandline switch to disable it. This special function is needed,
+	because gcc 4.4 and later accept any unknown -Wno-* option and only
+	warn about it if there is another warning in the source file.
+
+	Example:
+		KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+	In the above example, -Wno-unused-but-set-variable will be added to
+	KBUILD_CFLAGS only if gcc really accepts it.
+
     cc-version
 	cc-version returns a numerical version of the $(CC) compiler version.
 	The format is <major><minor> where both are two digits. So for example
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
deleted file mode 100644
index 1ed0e98..0000000
--- a/Documentation/video4linux/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
-# List of programs to build
-hostprogs-y := v4lgrab
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c
deleted file mode 100644
index c8ded17..0000000
--- a/Documentation/video4linux/v4lgrab.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/* Simple Video4Linux image grabber. */
-/*
- *	Video4Linux Driver Test/Example Framegrabbing Program
- *
- *	Compile with:
- *		gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
- *	Use as:
- *		v4lgrab >image.ppm
- *
- *	Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
- *	Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
- *	with minor modifications (Dave Forrest, drf5n@virginia.edu).
- *
- *
- *	For some cameras you may need to pre-load libv4l to perform
- *	the necessary decompression, e.g.:
- *
- *	export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so
- *	./v4lgrab >image.ppm
- *
- *	see http://hansdegoede.livejournal.com/3636.html for details.
- *
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <stdlib.h>
-
-#include <linux/types.h>
-#include <linux/videodev.h>
-
-#define VIDEO_DEV "/dev/video0"
-
-/* Stole this from tvset.c */
-
-#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b)                   \
-{                                                                       \
-	switch (format)                                                 \
-	{                                                               \
-		case VIDEO_PALETTE_GREY:                                \
-			switch (depth)                                  \
-			{                                               \
-				case 4:                                 \
-				case 6:                                 \
-				case 8:                                 \
-					(r) = (g) = (b) = (*buf++ << 8);\
-					break;                          \
-									\
-				case 16:                                \
-					(r) = (g) = (b) =               \
-						*((unsigned short *) buf);      \
-					buf += 2;                       \
-					break;                          \
-			}                                               \
-			break;                                          \
-									\
-									\
-		case VIDEO_PALETTE_RGB565:                              \
-		{                                                       \
-			unsigned short tmp = *(unsigned short *)buf;    \
-			(r) = tmp&0xF800;                               \
-			(g) = (tmp<<5)&0xFC00;                          \
-			(b) = (tmp<<11)&0xF800;                         \
-			buf += 2;                                       \
-		}                                                       \
-		break;                                                  \
-									\
-		case VIDEO_PALETTE_RGB555:                              \
-			(r) = (buf[0]&0xF8)<<8;                         \
-			(g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8;    \
-			(b) = ((buf[1] << 2 ) & 0xF8)<<8;               \
-			buf += 2;                                       \
-			break;                                          \
-									\
-		case VIDEO_PALETTE_RGB24:                               \
-			(r) = buf[0] << 8; (g) = buf[1] << 8;           \
-			(b) = buf[2] << 8;                              \
-			buf += 3;                                       \
-			break;                                          \
-									\
-		default:                                                \
-			fprintf(stderr,                                 \
-				"Format %d not yet supported\n",        \
-				format);                                \
-	}                                                               \
-}
-
-static int get_brightness_adj(unsigned char *image, long size, int *brightness) {
-  long i, tot = 0;
-  for (i=0;i<size*3;i++)
-    tot += image[i];
-  *brightness = (128 - tot/(size*3))/3;
-  return !((tot/(size*3)) >= 126 && (tot/(size*3)) <= 130);
-}
-
-int main(int argc, char ** argv)
-{
-  int fd = open(VIDEO_DEV, O_RDONLY), f;
-  struct video_capability cap;
-  struct video_window win;
-  struct video_picture vpic;
-
-  unsigned char *buffer, *src;
-  int bpp = 24, r = 0, g = 0, b = 0;
-  unsigned int i, src_depth = 16;
-
-  if (fd < 0) {
-    perror(VIDEO_DEV);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
-    perror("VIDIOGCAP");
-    fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n");
-    close(fd);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGWIN, &win) < 0) {
-    perror("VIDIOCGWIN");
-    close(fd);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) {
-    perror("VIDIOCGPICT");
-    close(fd);
-    exit(1);
-  }
-
-  if (cap.type & VID_TYPE_MONOCHROME) {
-    vpic.depth=8;
-    vpic.palette=VIDEO_PALETTE_GREY;    /* 8bit grey */
-    if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-      vpic.depth=6;
-      if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-	vpic.depth=4;
-	if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-	  fprintf(stderr, "Unable to find a supported capture format.\n");
-	  close(fd);
-	  exit(1);
-	}
-      }
-    }
-  } else {
-    vpic.depth=24;
-    vpic.palette=VIDEO_PALETTE_RGB24;
-
-    if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-      vpic.palette=VIDEO_PALETTE_RGB565;
-      vpic.depth=16;
-
-      if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	vpic.palette=VIDEO_PALETTE_RGB555;
-	vpic.depth=15;
-
-	if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	  fprintf(stderr, "Unable to find a supported capture format.\n");
-	  return -1;
-	}
-      }
-    }
-  }
-
-  buffer = malloc(win.width * win.height * bpp);
-  if (!buffer) {
-    fprintf(stderr, "Out of memory.\n");
-    exit(1);
-  }
-
-  do {
-    int newbright;
-    read(fd, buffer, win.width * win.height * bpp);
-    f = get_brightness_adj(buffer, win.width * win.height, &newbright);
-    if (f) {
-      vpic.brightness += (newbright << 8);
-      if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	perror("VIDIOSPICT");
-	break;
-      }
-    }
-  } while (f);
-
-  fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height);
-
-  src = buffer;
-
-  for (i = 0; i < win.width * win.height; i++) {
-    READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b);
-    fputc(r>>8, stdout);
-    fputc(g>>8, stdout);
-    fputc(b>>8, stdout);
-  }
-
-  close(fd);
-  return 0;
-}
diff --git a/Makefile b/Makefile
index 400a175..e427499 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = .48
+EXTRAVERSION = .49-rc1
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -537,6 +537,9 @@ ifndef CONFIG_CC_STACKPROTECTOR
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 endif
 
+# This warning generated too much noise in a regular build.
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
@@ -565,7 +568,7 @@ CHECKFLAGS     += $(NOSTDINC_FLAGS)
 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
 # disable pointer signed / unsigned warnings in gcc 4.0
-KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 2bef526..204f650 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -395,7 +395,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 {
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
 	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -433,16 +433,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		case TIOCMIWAIT:
 			printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
 			return 0;
-		/*
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
-			return 0;
-
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
 			/* "setserial -W" is called in Debian boot */
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 0d90390..3f202f7 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -471,6 +471,12 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	/*
+	 * Called from syscore in mainline but called directly here
+	 * since syscore does not exist in this tree.
+	 */
+	irq_pm_syscore_resume();
+
 	WARN_ONCE(!irqs_disabled(),
 		"Interrupts enabled while resuming system devices\n");
 
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 6c32fbf..579d479 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1262,6 +1262,36 @@ static int rs_break(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct async_struct *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cnow = info->state->icount;
+	local_irq_restore(flags);
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
@@ -1331,31 +1361,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 			}
 			/* NOTREACHED */
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			local_irq_save(flags);
-			cnow = info->state->icount;
-			local_irq_restore(flags);
-			icount.cts = cnow.cts;
-			icount.dsr = cnow.dsr;
-			icount.rng = cnow.rng;
-			icount.dcd = cnow.dcd;
-			icount.rx = cnow.rx;
-			icount.tx = cnow.tx;
-			icount.frame = cnow.frame;
-			icount.overrun = cnow.overrun;
-			icount.parity = cnow.parity;
-			icount.brk = cnow.brk;
-			icount.buf_overrun = cnow.buf_overrun;
-
-			if (copy_to_user(argp, &icount, sizeof(icount)))
-				return -EFAULT;
-			return 0;
 		case TIOCSERGWILD:
 		case TIOCSERSWILD:
 			/* "setserial -W" is called in Debian boot */
@@ -1948,6 +1953,7 @@ static const struct tty_operations serial_ops = {
 	.wait_until_sent = rs_wait_until_sent,
 	.tiocmget = rs_tiocmget,
 	.tiocmset = rs_tiocmset,
+	.get_icount = rs_get_icount,
 	.proc_fops = &rs_proc_fops,
 };
 
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 4254457..a0369dc 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -2798,29 +2798,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT: {
-		struct serial_icounter_struct sic = { };
-
-		spin_lock_irqsave(&info->card->card_lock, flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->card->card_lock, flags);
-
-		sic.cts = cnow.cts;
-		sic.dsr = cnow.dsr;
-		sic.rng = cnow.rng;
-		sic.dcd = cnow.dcd;
-		sic.rx = cnow.rx;
-		sic.tx = cnow.tx;
-		sic.frame = cnow.frame;
-		sic.overrun = cnow.overrun;
-		sic.parity = cnow.parity;
-		sic.brk = cnow.brk;
-		sic.buf_overrun = cnow.buf_overrun;
-
-		if (copy_to_user(argp, &sic, sizeof(sic)))
-			ret_val = -EFAULT;
-		break;
-	}
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
@@ -2832,6 +2809,31 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	return ret_val;
 }				/* cy_ioctl */
 
+static int cy_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *sic)
+{
+	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_icount cnow;	/* Used to snapshot */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	sic->cts = cnow.cts;
+	sic->dsr = cnow.dsr;
+	sic->rng = cnow.rng;
+	sic->dcd = cnow.dcd;
+	sic->rx = cnow.rx;
+	sic->tx = cnow.tx;
+	sic->frame = cnow.frame;
+	sic->overrun = cnow.overrun;
+	sic->parity = cnow.parity;
+	sic->brk = cnow.brk;
+	sic->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /*
  * This routine allows the tty driver to be notified when
  * device's termios settings have changed.  Note that a
@@ -4098,6 +4100,7 @@ static const struct tty_operations cy_ops = {
 	.wait_until_sent = cy_wait_until_sent,
 	.tiocmget = cy_tiocmget,
 	.tiocmset = cy_tiocmset,
+	.get_icount = cy_get_icount,
 	.proc_fops = &cyclades_proc_fops,
 };
 
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 517271c..3bec541 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -183,6 +183,8 @@ static void ip2_hangup(PTTY);
 static int  ip2_tiocmget(struct tty_struct *tty, struct file *file);
 static int  ip2_tiocmset(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+static int ip2_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount);
 
 static void set_irq(int, int);
 static void ip2_interrupt_bh(struct work_struct *work);
@@ -448,6 +450,7 @@ static const struct tty_operations ip2_ops = {
 	.hangup          = ip2_hangup,
 	.tiocmget	 = ip2_tiocmget,
 	.tiocmset	 = ip2_tiocmset,
+	.get_icount	 = ip2_get_icount,
 	.proc_fops	 = &ip2_proc_fops,
 };
 
@@ -2112,7 +2115,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 	i2ChanStrPtr pCh = DevTable[tty->index];
 	i2eBordStrPtr pB;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;
 	int rc = 0;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -2281,34 +2283,6 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 		break;
 
 	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for RI where
-	 * only 0->1 is counted. The controller is quite capable of counting
-	 * both, but this done to preserve compatibility with the standard
-	 * serial driver.
-	 */
-	case TIOCGICOUNT:
-		ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
-
-		write_lock_irqsave(&pB->read_fifo_spinlock, flags);
-		cnow = pCh->icount;
-		write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-		p_cuser = argp;
-		rc = put_user(cnow.cts, &p_cuser->cts);
-		rc = put_user(cnow.dsr, &p_cuser->dsr);
-		rc = put_user(cnow.rng, &p_cuser->rng);
-		rc = put_user(cnow.dcd, &p_cuser->dcd);
-		rc = put_user(cnow.rx, &p_cuser->rx);
-		rc = put_user(cnow.tx, &p_cuser->tx);
-		rc = put_user(cnow.frame, &p_cuser->frame);
-		rc = put_user(cnow.overrun, &p_cuser->overrun);
-		rc = put_user(cnow.parity, &p_cuser->parity);
-		rc = put_user(cnow.brk, &p_cuser->brk);
-		rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
-		break;
-
-	/*
 	 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
 	 * will be passed to the line discipline for it to handle.
 	 */
@@ -2332,6 +2306,46 @@ ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
 	return rc;
 }
 
+static int ip2_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+{
+	i2ChanStrPtr pCh = DevTable[tty->index];
+	i2eBordStrPtr pB;
+	struct async_icount cnow;	/* kernel counter temp */
+	unsigned long flags;
+
+	if ( pCh == NULL )
+		return -ENODEV;
+
+	pB = pCh->pMyBord;
+
+	/*
+	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+	 * Return: write counters to the user passed counter struct
+	 * NB: both 1->0 and 0->1 transitions are counted except for RI where
+	 * only 0->1 is counted. The controller is quite capable of counting
+	 * both, but this done to preserve compatibility with the standard
+	 * serial driver.
+	 */
+
+	write_lock_irqsave(&pB->read_fifo_spinlock, flags);
+	cnow = pCh->icount;
+	write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /******************************************************************************/
 /* Function:   GetSerialInfo()                                                */
 /* Parameters: Pointer to channel structure                                   */
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 5e28d39..4b97406 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1736,7 +1736,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 		return 0;
 	}
 
-	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
 			test_bit(TTY_IO_ERROR, &tty->flags))
 		return -EIO;
 
@@ -1766,32 +1766,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 
 		return wait_event_interruptible(info->port.delta_msr_wait,
 				mxser_cflags_changed(info, arg, &cnow));
-	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for
-	 *     RI where only 0->1 is counted.
-	 */
-	case TIOCGICOUNT: {
-		struct serial_icounter_struct icnt = { 0 };
-		spin_lock_irqsave(&info->slock, flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->slock, flags);
-
-		icnt.frame = cnow.frame;
-		icnt.brk = cnow.brk;
-		icnt.overrun = cnow.overrun;
-		icnt.buf_overrun = cnow.buf_overrun;
-		icnt.parity = cnow.parity;
-		icnt.rx = cnow.rx;
-		icnt.tx = cnow.tx;
-		icnt.cts = cnow.cts;
-		icnt.dsr = cnow.dsr;
-		icnt.rng = cnow.rng;
-		icnt.dcd = cnow.dcd;
-
-		return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
-	}
 	case MOXA_HighSpeedOn:
 		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
 	case MOXA_SDS_RSTICOUNTER:
@@ -1862,6 +1836,39 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
 	return 0;
 }
 
+	/*
+	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+	 * Return: write counters to the user passed counter struct
+	 * NB: both 1->0 and 0->1 transitions are counted except for
+	 *     RI where only 0->1 is counted.
+	 */
+
+static int mxser_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount)
+
+{
+	struct mxser_port *info = tty->driver_data;
+	struct async_icount cnow;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->slock, flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->slock, flags);
+
+	icount->frame = cnow.frame;
+	icount->brk = cnow.brk;
+	icount->overrun = cnow.overrun;
+	icount->buf_overrun = cnow.buf_overrun;
+	icount->parity = cnow.parity;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	return 0;
+}
+
 static void mxser_stoprx(struct tty_struct *tty)
 {
 	struct mxser_port *info = tty->driver_data;
@@ -2358,6 +2365,7 @@ static const struct tty_operations mxser_ops = {
 	.wait_until_sent = mxser_wait_until_sent,
 	.tiocmget = mxser_tiocmget,
 	.tiocmset = mxser_tiocmset,
+	.get_icount = mxser_get_icount,
 };
 
 struct tty_port_operations mxser_port_ops = {
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index dc52f75..19b3e1d 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1783,24 +1783,24 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
 	return ret;
 }
 
-static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp)
+static int ntty_tiocgicount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
 {
+	struct port *port = tty->driver_data;
 	const struct async_icount cnow = port->tty_icount;
-	struct serial_icounter_struct icount;
-
-	icount.cts = cnow.cts;
-	icount.dsr = cnow.dsr;
-	icount.rng = cnow.rng;
-	icount.dcd = cnow.dcd;
-	icount.rx = cnow.rx;
-	icount.tx = cnow.tx;
-	icount.frame = cnow.frame;
-	icount.overrun = cnow.overrun;
-	icount.parity = cnow.parity;
-	icount.brk = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
-
-	return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
 }
 
 static int ntty_ioctl(struct tty_struct *tty, struct file *file,
@@ -1819,9 +1819,7 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
 		rval = wait_event_interruptible(port->tty_wait,
 				ntty_cflags_changed(port, arg, &cprev));
 		break;
-	} case TIOCGICOUNT:
-		rval = ntty_ioctl_tiocgicount(port, argp);
-		break;
+	}
 	default:
 		DBG1("ERR: 0x%08X, %d", cmd, cmd);
 		break;
@@ -1895,6 +1893,7 @@ static const struct tty_operations tty_ops = {
 	.chars_in_buffer = ntty_chars_in_buffer,
 	.tiocmget = ntty_tiocmget,
 	.tiocmset = ntty_tiocmset,
+	.get_icount = ntty_tiocgicount,
 };
 
 /* Module initialization */
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index a08c899..74d124b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2252,6 +2252,32 @@ static int mgslpc_break(struct tty_struct *tty, int break_state)
 	return 0;
 }
 
+static int mgslpc_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /* Service an IOCTL request
  *
  * Arguments:
@@ -2267,11 +2293,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 			unsigned int cmd, unsigned long arg)
 {
 	MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
 	void __user *argp = (void __user *)arg;
-	unsigned long flags;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
 		printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
@@ -2281,7 +2303,7 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -2311,34 +2333,6 @@ static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
 		return wait_events(info, argp);
 	case TIOCMIWAIT:
 		return modem_input_wait(info,(int)arg);
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		PUT_USER(error,cnow.cts, &p_cuser->cts);
-		if (error) return error;
-		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-		if (error) return error;
-		PUT_USER(error,cnow.rng, &p_cuser->rng);
-		if (error) return error;
-		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-		if (error) return error;
-		PUT_USER(error,cnow.rx, &p_cuser->rx);
-		if (error) return error;
-		PUT_USER(error,cnow.tx, &p_cuser->tx);
-		if (error) return error;
-		PUT_USER(error,cnow.frame, &p_cuser->frame);
-		if (error) return error;
-		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-		if (error) return error;
-		PUT_USER(error,cnow.parity, &p_cuser->parity);
-		if (error) return error;
-		PUT_USER(error,cnow.brk, &p_cuser->brk);
-		if (error) return error;
-		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (error) return error;
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 4846b73..b118959 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -2920,6 +2920,38 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
 	
 }	/* end of mgsl_break() */
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int msgl_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct mgsl_struct * info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->irq_spinlock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->irq_spinlock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+	return 0;
+}
+
 /* mgsl_ioctl()	Service an IOCTL request
  * 	
  * Arguments:
@@ -2945,7 +2977,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -2958,11 +2990,7 @@ static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
 
 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
 {
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
 	void __user *argp = (void __user *)arg;
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	
 	switch (cmd) {
 		case MGSL_IOCGPARAMS:
@@ -2991,40 +3019,6 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
 		case TIOCMIWAIT:
 			return modem_input_wait(info,(int)arg);
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			spin_lock_irqsave(&info->irq_spinlock,flags);
-			cnow = info->icount;
-			spin_unlock_irqrestore(&info->irq_spinlock,flags);
-			p_cuser = argp;
-			PUT_USER(error,cnow.cts, &p_cuser->cts);
-			if (error) return error;
-			PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-			if (error) return error;
-			PUT_USER(error,cnow.rng, &p_cuser->rng);
-			if (error) return error;
-			PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-			if (error) return error;
-			PUT_USER(error,cnow.rx, &p_cuser->rx);
-			if (error) return error;
-			PUT_USER(error,cnow.tx, &p_cuser->tx);
-			if (error) return error;
-			PUT_USER(error,cnow.frame, &p_cuser->frame);
-			if (error) return error;
-			PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-			if (error) return error;
-			PUT_USER(error,cnow.parity, &p_cuser->parity);
-			if (error) return error;
-			PUT_USER(error,cnow.brk, &p_cuser->brk);
-			if (error) return error;
-			PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-			if (error) return error;
-			return 0;
 		default:
 			return -ENOIOCTLCMD;
 	}
@@ -4325,6 +4319,7 @@ static const struct tty_operations mgsl_ops = {
 	.hangup = mgsl_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = msgl_get_icount,
 	.proc_fops = &mgsl_proc_fops,
 };
 
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 8678f0c..c300ff6 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1057,9 +1057,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
 	struct slgt_info *info = tty->driver_data;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 	int ret;
 
@@ -1068,7 +1065,7 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 	DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1121,25 +1118,6 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 	case MGSL_IOCWAITGPIO:
 		ret = wait_gpio(info, argp);
 		break;
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		if (put_user(cnow.cts, &p_cuser->cts) ||
-		    put_user(cnow.dsr, &p_cuser->dsr) ||
-		    put_user(cnow.rng, &p_cuser->rng) ||
-		    put_user(cnow.dcd, &p_cuser->dcd) ||
-		    put_user(cnow.rx, &p_cuser->rx) ||
-		    put_user(cnow.tx, &p_cuser->tx) ||
-		    put_user(cnow.frame, &p_cuser->frame) ||
-		    put_user(cnow.overrun, &p_cuser->overrun) ||
-		    put_user(cnow.parity, &p_cuser->parity) ||
-		    put_user(cnow.brk, &p_cuser->brk) ||
-		    put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
-			ret = -EFAULT;
-		ret = 0;
-		break;
 	default:
 		ret = -ENOIOCTLCMD;
 	}
@@ -1147,6 +1125,33 @@ static int ioctl(struct tty_struct *tty, struct file *file,
 	return ret;
 }
 
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+
+{
+	struct slgt_info *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 /*
  * support for 32 bit ioctl calls on 64 bit systems
  */
@@ -1236,10 +1241,6 @@ static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
 	case MGSL_IOCSGPIO:
 	case MGSL_IOCGGPIO:
 	case MGSL_IOCWAITGPIO:
-	case TIOCGICOUNT:
-		rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
-		break;
-
 	case MGSL_IOCSTXIDLE:
 	case MGSL_IOCTXENABLE:
 	case MGSL_IOCRXENABLE:
@@ -3639,6 +3640,7 @@ static const struct tty_operations ops = {
 	.hangup = hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = get_icount,
 	.proc_fops = &synclink_gt_proc_fops,
 };
 
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 2b18adc..951b65f 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -1255,10 +1255,6 @@ static int do_ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
 	SLMP_INFO *info = tty->driver_data;
-	int error;
-	struct mgsl_icount cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
-	unsigned long flags;
 	void __user *argp = (void __user *)arg;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)
@@ -1269,7 +1265,7 @@ static int do_ioctl(struct tty_struct *tty, struct file *file,
 		return -ENODEV;
 
 	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	    (cmd != TIOCMIWAIT)) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1307,40 +1303,38 @@ static int do_ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT:
-		spin_lock_irqsave(&info->lock,flags);
-		cnow = info->icount;
-		spin_unlock_irqrestore(&info->lock,flags);
-		p_cuser = argp;
-		PUT_USER(error,cnow.cts, &p_cuser->cts);
-		if (error) return error;
-		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
-		if (error) return error;
-		PUT_USER(error,cnow.rng, &p_cuser->rng);
-		if (error) return error;
-		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
-		if (error) return error;
-		PUT_USER(error,cnow.rx, &p_cuser->rx);
-		if (error) return error;
-		PUT_USER(error,cnow.tx, &p_cuser->tx);
-		if (error) return error;
-		PUT_USER(error,cnow.frame, &p_cuser->frame);
-		if (error) return error;
-		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
-		if (error) return error;
-		PUT_USER(error,cnow.parity, &p_cuser->parity);
-		if (error) return error;
-		PUT_USER(error,cnow.brk, &p_cuser->brk);
-		if (error) return error;
-		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (error) return error;
-		return 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
 	return 0;
 }
 
+static int get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	SLMP_INFO *info = tty->driver_data;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	cnow = info->icount;
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
 static int ioctl(struct tty_struct *tty, struct file *file,
 		 unsigned int cmd, unsigned long arg)
 {
@@ -3908,6 +3902,7 @@ static const struct tty_operations ops = {
 	.hangup = hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = get_icount,
 	.proc_fops = &synclinkmp_proc_fops,
 };
 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 53ffcfc..123cedf 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -96,6 +96,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
+#include <linux/serial.h>
 
 #include <linux/uaccess.h>
 #include <asm/system.h>
@@ -2436,6 +2437,20 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	return tty->ops->tiocmset(tty, file, set, clear);
 }
 
+static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
+{
+	int retval = -EINVAL;
+	struct serial_icounter_struct icount;
+	memset(&icount, 0, sizeof(icount));
+	if (tty->ops->get_icount)
+		retval = tty->ops->get_icount(tty, &icount);
+	if (retval != 0)
+		return retval;
+	if (copy_to_user(arg, &icount, sizeof(icount)))
+		return -EFAULT;
+	return 0;
+}
+
 struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
 {
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2556,6 +2571,12 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case TIOCMBIC:
 	case TIOCMBIS:
 		return tty_tiocmset(tty, file, cmd, p);
+	case TIOCGICOUNT:
+		retval = tty_tiocgicount(tty, p);
+		/* For the moment allow fall through to the old method */
+        	if (retval != -EINVAL)
+			return retval;
+		break;
 	case TCFLSH:
 		switch (arg) {
 		case TCIFLUSH:
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 3ada62b..27a3074 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -482,14 +482,17 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		return -EBADF;
 	obj_priv = obj->driver_private;
 
-	/* Bounds check source.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference(obj);
-		return -EINVAL;
+	/* Bounds check source.  */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	if (i915_gem_object_needs_bit17_swizzle(obj)) {
@@ -501,8 +504,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 							file_priv);
 	}
 
+err:
 	drm_gem_object_unreference(obj);
-
 	return ret;
 }
 
@@ -592,8 +595,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj,
 
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	remain = args->size;
-	if (!access_ok(VERIFY_READ, user_data, remain))
-		return -EFAULT;
 
 
 	mutex_lock(&dev->struct_mutex);
@@ -955,14 +956,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		return -EBADF;
 	obj_priv = obj->driver_private;
 
-	/* Bounds check destination.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference(obj);
-		return -EINVAL;
+	/* Bounds check destination. */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise
@@ -995,8 +999,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		DRM_INFO("pwrite failed %d\n", ret);
 #endif
 
+err:
 	drm_gem_object_unreference(obj);
-
 	return ret;
 }
 
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index cf59d64..883215d 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3038,12 +3038,16 @@ static void handle_stripe5(struct stripe_head *sh)
 	/* check if the array has lost two devices and, if so, some requests might
 	 * need to be failed
 	 */
-	if (s.failed > 1 && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &return_bi);
-	if (s.failed > 1 && s.syncing) {
-		md_done_sync(conf->mddev, STRIPE_SECTORS,0);
-		clear_bit(STRIPE_SYNCING, &sh->state);
-		s.syncing = 0;
+	if (s.failed > 1) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+		if (s.syncing) {
+			md_done_sync(conf->mddev, STRIPE_SECTORS,0);
+			clear_bit(STRIPE_SYNCING, &sh->state);
+			s.syncing = 0;
+		}
 	}
 
 	/* might be able to return some write requests if the parity block
@@ -3314,12 +3318,16 @@ static void handle_stripe6(struct stripe_head *sh)
 	/* check if the array has lost >2 devices and, if so, some requests
 	 * might need to be failed
 	 */
-	if (s.failed > 2 && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &return_bi);
-	if (s.failed > 2 && s.syncing) {
-		md_done_sync(conf->mddev, STRIPE_SECTORS,0);
-		clear_bit(STRIPE_SYNCING, &sh->state);
-		s.syncing = 0;
+	if (s.failed > 2) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+		if (s.syncing) {
+			md_done_sync(conf->mddev, STRIPE_SECTORS,0);
+			clear_bit(STRIPE_SYNCING, &sh->state);
+			s.syncing = 0;
+		}
 	}
 
 	/*
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 5b081cb..726a1b8 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -290,6 +290,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count
 			ops.mode = MTD_OOB_RAW;
 			ops.datbuf = kbuf;
 			ops.oobbuf = NULL;
+			ops.ooboffs = 0;
 			ops.len = len;
 
 			ret = mtd->write_oob(mtd, *ppos, &ops);
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 554626e..d03a926 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -275,6 +275,7 @@ static void scsi_host_dev_release(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev);
 	struct device *parent = dev->parent;
+	struct request_queue *q;
 
 	scsi_proc_hostdir_rm(shost->hostt);
 
@@ -282,9 +283,11 @@ static void scsi_host_dev_release(struct device *dev)
 		kthread_stop(shost->ehandler);
 	if (shost->work_q)
 		destroy_workqueue(shost->work_q);
-	if (shost->uspace_req_q) {
-		kfree(shost->uspace_req_q->queuedata);
-		scsi_free_queue(shost->uspace_req_q);
+	q = shost->uspace_req_q;
+	if (q) {
+		kfree(q->queuedata);
+		q->queuedata = NULL;
+		scsi_free_queue(q);
 	}
 
 	scsi_destroy_command_freelist(shost);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 1492e3e..1ae7b7c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1672,6 +1672,15 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
 
 void scsi_free_queue(struct request_queue *q)
 {
+	unsigned long flags;
+
+	WARN_ON(q->queuedata);
+
+	/* cause scsi_request_fn() to kill all non-finished requests */
+	spin_lock_irqsave(q->queue_lock, flags);
+	q->request_fn(q);
+	spin_unlock_irqrestore(q->queue_lock, flags);
+
 	blk_cleanup_queue(q);
 }
 
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 5081f97..723da1d 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -461,14 +461,16 @@ static void st_scsi_execute_end(struct request *req, int uptodate)
 {
 	struct st_request *SRpnt = req->end_io_data;
 	struct scsi_tape *STp = SRpnt->stp;
+	struct bio *tmp;
 
 	STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
 	STp->buffer->cmdstat.residual = req->resid_len;
 
+	tmp = SRpnt->bio;
 	if (SRpnt->waiting)
 		complete(SRpnt->waiting);
 
-	blk_rq_unmap_user(SRpnt->bio);
+	blk_rq_unmap_user(tmp);
 	__blk_put_request(req->q, req);
 }
 
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd..1e4f831 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1381,6 +1381,30 @@ static void send_break(ser_info_t *info, unsigned int duration)
 }
 
 
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int rs_360_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	ser_info_t *info = (ser_info_t *)tty->driver_data;
+	struct async_icount cnow;
+
+	local_irq_disable();
+	cnow = info->state->icount;
+	local_irq_enable();
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+
+	return 0;
+}
+
 static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
 {
@@ -1394,7 +1418,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
 		return -ENODEV;
 
-	if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+	if (cmd != TIOCMIWAIT) {
 		if (tty->flags & (1 << TTY_IO_ERROR))
 		    return -EIO;
 	}
@@ -1477,31 +1501,6 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
 			return 0;
 #endif
 
-		/* 
-		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-		 * Return: write counters to the user passed counter struct
-		 * NB: both 1->0 and 0->1 transitions are counted except for
-		 *     RI where only 0->1 is counted.
-		 */
-		case TIOCGICOUNT:
-			local_irq_disable();
-			cnow = info->state->icount;
-			local_irq_enable();
-			p_cuser = (struct serial_icounter_struct *) arg;
-/* 			error = put_user(cnow.cts, &p_cuser->cts); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dsr, &p_cuser->dsr); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.rng, &p_cuser->rng); */
-/* 			if (error) return error; */
-/* 			error = put_user(cnow.dcd, &p_cuser->dcd); */
-/* 			if (error) return error; */
-
-			put_user(cnow.cts, &p_cuser->cts);
-			put_user(cnow.dsr, &p_cuser->dsr);
-			put_user(cnow.rng, &p_cuser->rng);
-			put_user(cnow.dcd, &p_cuser->dcd);
-			return 0;
 
 		default:
 			return -ENOIOCTLCMD;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index dcc7244..772d9d8 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1067,10 +1067,10 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
  * NB: both 1->0 and 0->1 transitions are counted except for
  *     RI where only 0->1 is counted.
  */
-static int uart_get_count(struct uart_state *state,
-			  struct serial_icounter_struct __user *icnt)
+static int uart_get_icount(struct tty_struct *tty,
+			  struct serial_icounter_struct *icount)
 {
-	struct serial_icounter_struct icount;
+	struct uart_state *state = tty->driver_data;
 	struct uart_icount cnow;
 	struct uart_port *uport = state->uart_port;
 
@@ -1078,19 +1078,19 @@ static int uart_get_count(struct uart_state *state,
 	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
 	spin_unlock_irq(&uport->lock);
 
-	icount.cts         = cnow.cts;
-	icount.dsr         = cnow.dsr;
-	icount.rng         = cnow.rng;
-	icount.dcd         = cnow.dcd;
-	icount.rx          = cnow.rx;
-	icount.tx          = cnow.tx;
-	icount.frame       = cnow.frame;
-	icount.overrun     = cnow.overrun;
-	icount.parity      = cnow.parity;
-	icount.brk         = cnow.brk;
-	icount.buf_overrun = cnow.buf_overrun;
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
 
-	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+	return 0;
 }
 
 /*
@@ -1143,10 +1143,6 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 	case TIOCMIWAIT:
 		ret = uart_wait_modem_status(state, arg);
 		break;
-
-	case TIOCGICOUNT:
-		ret = uart_get_count(state, uarg);
-		break;
 	}
 
 	if (ret != -ENOIOCTLCMD)
@@ -2322,6 +2318,7 @@ static const struct tty_operations uart_ops = {
 #endif
 	.tiocmget	= uart_tiocmget,
 	.tiocmset	= uart_tiocmset,
+	.get_icount	= uart_get_icount,
 #ifdef CONFIG_CONSOLE_POLL
 	.poll_init	= uart_poll_init,
 	.poll_get_char	= uart_poll_get_char,
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 93448eb..e163df9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,15 +47,42 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7a4b41c..5689b90 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2355,13 +2355,19 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	termios->c_cflag &= ~CMSPAR;
@@ -2398,6 +2404,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2423,6 +2430,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 150cad4..9f89940 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -101,7 +101,6 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f..c38b8c0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index bd3fa7f..f23f3b4 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -562,6 +562,18 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 	return -EINVAL;
 }
 
+static int serial_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (port->serial->type->get_icount)
+		return port->serial->type->get_icount(tty, icount);
+	return -EINVAL;
+}
+
 /*
  * We would be calling tty_wakeup here, but unfortunately some line
  * disciplines have an annoying habit of calling tty->write from
@@ -1214,6 +1226,7 @@ static const struct tty_operations serial_ops = {
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
+	.get_icount = 		serial_get_icount,
 	.cleanup = 		serial_cleanup,
 	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index fc310f7..0fded39 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -58,7 +58,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available
@@ -66,9 +68,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 009ca4e..15ed43e 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -536,7 +536,7 @@ int bind_ipi_to_irqhandler(enum ipi_vector ipi,
 	if (irq < 0)
 		return irq;
 
-	irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME;
+	irqflags |= IRQF_NO_SUSPEND | IRQF_FORCE_RESUME | IRQF_EARLY_RESUME;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
 	if (retval != 0) {
 		unbind_from_irq(irq);
diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c
index e673a88..b1ce4c7 100644
--- a/fs/hfs/trans.c
+++ b/fs/hfs/trans.c
@@ -40,6 +40,8 @@ int hfs_mac2asc(struct super_block *sb, char *out, const struct hfs_name *in)
 
 	src = in->name;
 	srclen = in->len;
+	if (srclen > HFS_NAMELEN)
+		srclen = HFS_NAMELEN;
 	dst = out;
 	dstlen = HFS_MAX_NAMELEN;
 	if (nls_io) {
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 4528f29..c739150 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -54,6 +54,8 @@
  *                irq line disabled until the threaded handler has been run.
  * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
  * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
+ * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
+ *                resume time.
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040
@@ -66,6 +68,7 @@
 #define IRQF_ONESHOT		0x00002000
 #define IRQF_NO_SUSPEND		0x00004000
 #define IRQF_FORCE_RESUME	0x00008000
+#define IRQF_EARLY_RESUME	0x00020000
 
 #define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND)
 
@@ -198,13 +201,16 @@ extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
 extern int check_wakeup_irqs(void);
+extern void irq_pm_syscore_resume(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
+static inline void irq_pm_syscore_resume(void) { };
 #endif
 #else
 static inline void suspend_device_irqs(void) { };
 static inline void resume_device_irqs(void) { };
 static inline int check_wakeup_irqs(void) { return 0; }
+static inline void irq_pm_syscore_resume(void) { };
 #endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index b086779..db2d227 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -224,6 +224,12 @@
  *	unless the tty also has a valid tty->termiox pointer.
  *
  *	Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ *	structure to complete. This method is optional and will only be called
+ *	if provided (otherwise EINVAL will be returned).
  */
 
 #include <linux/fs.h>
@@ -232,6 +238,7 @@
 
 struct tty_struct;
 struct tty_driver;
+struct serial_icounter_struct;
 
 struct tty_operations {
 	struct tty_struct * (*lookup)(struct tty_driver *driver,
@@ -268,6 +275,8 @@ struct tty_operations {
 			unsigned int set, unsigned int clear);
 	int (*resize)(struct tty_struct *tty, struct winsize *ws);
 	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+	int (*get_icount)(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
 #ifdef CONFIG_CONSOLE_POLL
 	int (*poll_init)(struct tty_driver *driver, int line, char *options);
 	int (*poll_get_char)(struct tty_driver *driver, int line);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index bb911e3..78670cb 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -259,6 +259,8 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	int  (*get_icount)(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
 	/* Called by the tty layer for port level work. There may or may not
 	   be an attached tty at this point */
 	void (*dtr_rts)(struct usb_serial_port *port, int on);
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 3c123c3..819a634 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -13,6 +13,7 @@ struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
 #define VM_MAP		0x00000004	/* vmap()ed pages */
 #define VM_USERMAP	0x00000008	/* suitable for remap_vmalloc_range */
 #define VM_VPAGES	0x00000010	/* buffer for pages was vmalloc'ed */
+#define VM_UNLIST	0x00000020	/* vm_struct is not listed in vmlist */
 /* bits [20..32] reserved for arch specific ioremap internals */
 
 /*
diff --git a/kernel/irq/pm.c b/kernel/irq/pm.c
index 0067abb..b1fc3dd 100644
--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c
@@ -39,25 +39,46 @@ void suspend_device_irqs(void)
 }
 EXPORT_SYMBOL_GPL(suspend_device_irqs);
 
-/**
- * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
- *
- * Enable all interrupt lines previously disabled by suspend_device_irqs() that
- * have the IRQ_SUSPENDED flag set.
- */
-void resume_device_irqs(void)
+static void resume_irqs(bool want_early)
 {
 	struct irq_desc *desc;
 	int irq;
 
 	for_each_irq_desc(irq, desc) {
 		unsigned long flags;
+		bool is_early = desc->action &&
+			desc->action->flags & IRQF_EARLY_RESUME;
+
+		if (is_early != want_early)
+			continue;
 
 		spin_lock_irqsave(&desc->lock, flags);
 		__enable_irq(desc, irq, true);
 		spin_unlock_irqrestore(&desc->lock, flags);
 	}
 }
+
+/**
+ * irq_pm_syscore_ops - enable interrupt lines early
+ *
+ * Enable all interrupt lines with %IRQF_EARLY_RESUME set.
+ */
+void irq_pm_syscore_resume(void)
+{
+	resume_irqs(true);
+}
+
+/**
+ * resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
+ *
+ * Enable all non-%IRQF_EARLY_RESUME interrupt lines previously
+ * disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag
+ * set as well as those with %IRQF_FORCE_RESUME.
+ */
+void resume_device_irqs(void)
+{
+	resume_irqs(false);
+}
 EXPORT_SYMBOL_GPL(resume_device_irqs);
 
 /**
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 6f10dfc..40dd021 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -293,7 +293,7 @@ int enter_state(suspend_state_t state)
  */
 int pm_suspend(suspend_state_t state)
 {
-	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+	if (state > PM_SUSPEND_ON && state < PM_SUSPEND_MAX)
 		return enter_state(state);
 	return -EINVAL;
 }
diff --git a/lib/nlattr.c b/lib/nlattr.c
index c4706eb..109d4fe 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -20,6 +20,7 @@ static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = {
 	[NLA_U16]	= sizeof(u16),
 	[NLA_U32]	= sizeof(u32),
 	[NLA_U64]	= sizeof(u64),
+	[NLA_MSECS]	= sizeof(u64),
 	[NLA_NESTED]	= NLA_HDRLEN,
 };
 
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 7221e9e..f34ffd0 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1203,17 +1203,22 @@ EXPORT_SYMBOL_GPL(map_vm_area);
 DEFINE_RWLOCK(vmlist_lock);
 struct vm_struct *vmlist;
 
-static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
+static void setup_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
 			      unsigned long flags, void *caller)
 {
-	struct vm_struct *tmp, **p;
-
 	vm->flags = flags;
 	vm->addr = (void *)va->va_start;
 	vm->size = va->va_end - va->va_start;
 	vm->caller = caller;
 	va->private = vm;
 	va->flags |= VM_VM_AREA;
+}
+
+static void insert_vmalloc_vmlist(struct vm_struct *vm)
+{
+	struct vm_struct *tmp, **p;
+
+	vm->flags &= ~VM_UNLIST;
 
 	write_lock(&vmlist_lock);
 	for (p = &vmlist; (tmp = *p) != NULL; p = &tmp->next) {
@@ -1225,6 +1230,13 @@ static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
 	write_unlock(&vmlist_lock);
 }
 
+static void insert_vmalloc_vm(struct vm_struct *vm, struct vmap_area *va,
+			      unsigned long flags, void *caller)
+{
+	setup_vmalloc_vm(vm, va, flags, caller);
+	insert_vmalloc_vmlist(vm);
+}
+
 static struct vm_struct *__get_vm_area_node(unsigned long size,
 		unsigned long align, unsigned long flags, unsigned long start,
 		unsigned long end, int node, gfp_t gfp_mask, void *caller)
@@ -1263,7 +1275,18 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
 		return NULL;
 	}
 
-	insert_vmalloc_vm(area, va, flags, caller);
+	/*
+	 * When this function is called from __vmalloc_node,
+	 * we do not add vm_struct to vmlist here to avoid
+	 * accessing uninitialized members of vm_struct such as
+	 * pages and nr_pages fields. They will be set later.
+	 * To distinguish it from others, we use a VM_UNLIST flag.
+	 */
+	if (flags & VM_UNLIST)
+		setup_vmalloc_vm(area, va, flags, caller);
+	else
+		insert_vmalloc_vm(area, va, flags, caller);
+
 	return area;
 }
 
@@ -1338,17 +1361,20 @@ struct vm_struct *remove_vm_area(const void *addr)
 	va = find_vmap_area((unsigned long)addr);
 	if (va && va->flags & VM_VM_AREA) {
 		struct vm_struct *vm = va->private;
-		struct vm_struct *tmp, **p;
-		/*
-		 * remove from list and disallow access to this vm_struct
-		 * before unmap. (address range confliction is maintained by
-		 * vmap.)
-		 */
-		write_lock(&vmlist_lock);
-		for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next)
-			;
-		*p = tmp->next;
-		write_unlock(&vmlist_lock);
+
+		if (!(vm->flags & VM_UNLIST)) {
+			struct vm_struct *tmp, **p;
+			/*
+			 * remove from list and disallow access to
+			 * this vm_struct before unmap. (address range
+			 * confliction is maintained by vmap.)
+			 */
+			write_lock(&vmlist_lock);
+			for (p = &vmlist; (tmp = *p) != vm; p = &tmp->next)
+				;
+			*p = tmp->next;
+			write_unlock(&vmlist_lock);
+		}
 
 		vmap_debug_free_range(va->va_start, va->va_end);
 		free_unmap_vmap_area(va);
@@ -1568,8 +1594,9 @@ static void *__vmalloc_node(unsigned long size, unsigned long align,
 	if (!size || (size >> PAGE_SHIFT) > totalram_pages)
 		return NULL;
 
-	area = __get_vm_area_node(size, align, VM_ALLOC, VMALLOC_START,
-				  VMALLOC_END, node, gfp_mask, caller);
+	area = __get_vm_area_node(size, align, VM_ALLOC | VM_UNLIST,
+				  VMALLOC_START, VMALLOC_END, node,
+				  gfp_mask, caller);
 
 	if (!area)
 		return NULL;
@@ -1577,6 +1604,12 @@ static void *__vmalloc_node(unsigned long size, unsigned long align,
 	addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller);
 
 	/*
+	 * In this function, newly allocated vm_struct is not added
+	 * to vmlist at __get_vm_area_node(). so, it is added here.
+	 */
+	insert_vmalloc_vmlist(area);
+
+	/*
 	 * A ref_count = 3 is needed because the vm_struct and vmap_area
 	 * structures allocated in the __get_vm_area_node() function contain
 	 * references to the virtual address of the vmalloc'ed block.
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index cab71ea..5f6a305 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -844,10 +844,6 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned
 		BT_DBG("TIOCMIWAIT");
 		break;
 
-	case TIOCGICOUNT:
-		BT_DBG("TIOCGICOUNT");
-		break;
-
 	case TIOCGSERIAL:
 		BT_ERR("TIOCGSERIAL is not supported");
 		return -ENOIOCTLCMD;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index ca520d4..9cc6289 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1141,7 +1141,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, int features)
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Check if there is enough headroom to insert fragment header. */
-	if ((skb_headroom(skb) < frag_hdr_sz) &&
+	if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
 	    pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
 		goto out;
 
diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c
index 46b2647..adaa02c 100644
--- a/net/sunrpc/auth_unix.c
+++ b/net/sunrpc/auth_unix.c
@@ -129,6 +129,9 @@ unx_match(struct auth_cred *acred, struct rpc_cred *rcred, int flags)
 	for (i = 0; i < groups ; i++)
 		if (cred->uc_gids[i] != GROUP_AT(acred->group_info, i))
 			return 0;
+	if (groups < NFS_NGROUPS &&
+	    cred->uc_gids[groups] != NOGROUP)
+		return 0;
 	return 1;
 }
 
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index c67e73e..92b62a8 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -118,6 +118,11 @@ cc-option-yn = $(call try-run,\
 cc-option-align = $(subst -functions=0,,\
 	$(call cc-option,-falign-functions=0,-malign-functions=0))
 
+# cc-disable-warning
+# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
+cc-disable-warning = $(call try-run,\
+	$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -xc /dev/null -o "$$TMP",-Wno-$(strip $(1)))
+
 # cc-version
 # Usage gcc-ver := $(call cc-version)
 cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2db8b5a..ba44dc0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -12664,7 +12664,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
-	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
 	SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
 			"Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
 	/* almost compatible with toshiba but with optional digital outs;
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 63bc2ae..6fa3152 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -472,6 +472,7 @@ static int wm8940_set_bias_level(struct snd_soc_codec *codec,
 		ret = snd_soc_write(codec, WM8940_POWER1, pwr_reg);
 		break;
 	}
+	codec->bias_level = level;
 
 	return ret;
 }
